-
SC/UPC SM Fiber Optic Fast Connector is a perfect solution for filed working and FTTH connection. Optical fast connectors are widely used for where need to quick connection, providing a quick assembly and stable performance. The field assembly optical connector are available for UPC or APC polishing end face as option. Also the connector boot provides 900um loose tube and 3.0mm simplex cable or drop cable optional. -
SC/APC SM Optical Fast Connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. The field assembly optical connector are available for UPC or APC polishing end face as option. -
MPO/APC Fixed Optical Attenuator is used to reduce optical-signal electric power in all channels of 40/100G Parallel Optic Transmission, and other equipment with using MPO interconnection. It makes network's composition more concise than those of conservative way which is the connection method of attenuator independently in each channel, as downsizing the volume and saving time. This MPO Fixed Attenuator meets TIA/EIA 604-5. And IEC 61754-7 with compliance for RoHS -
Fiberlink’s Inline Fixed Optical Attenuator is a compact passive fiber optical component that provides accurate attenuation. The Fixed optical attenuator is packaged with fiber pigtails so that it can be easily connected into the optical fiber systems. Single mode fiber based attenuators with single window (1310nm or 1550nm) or dual window (1310&1550nm) are available. -
Fiberlink’s Manual Variable Optical Attenuator (MVOA) is a device designed to attenuate an intensity or power level of an input optical beam in a controlled manner to produce an output optical beam with different attenuated intensities. The Variable optical attenuator can be used for power control and equalization for WDMs, FTTx, CATV and Test & Measurement Instruments. The VOA attenuator provides the pigtail with FC, SC, LC connector optional or without connector. -
MPO OM3 Fiber Optic Loopback Module Tester is typically used for test and measurement procedures in networking environments. The MPO Loopback plug is ideal for a multitude of applications that require signal looping in a MTP/MPO form factor. The MPO loopback tester connects the transceiver and receiver pairs, allowing testing to be performed on a complete link. -
Fiberlink's SC Auto shutter Simplex adapter comes with an automatic shutter to protect against dust and other contaminants and prevents eye exposure to lasers. The Automatic shutter SC adapter meets the growing need for eye safety and connector cleanliness in today’s networking and telecommunication platforms. They are designed for mounting in panels with rectangular cutouts come with or without flange. Our SC Auto shutter adapters are available in simplex and duplex configurations and a variety of colors and options. -
Fiberlink's LC Internal shutter Quad Fiber Adapters are built with an integrated dust shutter that keeps the adapter's interior clean from dust. The shutter is 100% automatic and requires no physical handling of the shutter door. They are designed for mounting in panels with rectangular cutouts come with or without flange mount style ears. Our LC Inner shutter adapters are available in duplex and quad configurations and a variety of colors and options. -
Inner Shutter SC/APC Fiber Optic Adapter is designed, which has shutter plates inside to proof the dust and the light. Also, a real one-piece structure and a stable outer spring enable it more stable in panel. Our SC Internal shutter adapters are available in different colors with options for flange or flangeless body. -
Fiberlink LC Duplex Adapter with Auto shutter are specially designed to suit FTTH applications. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. Auto Shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. Our LC Auto shutter adapters are available in different colors with options for flange or flangeless body. -
Planar Lightwave Circuit (PLC) Splitter is to use silica optical waveguide technology with an even split ratio from one input fiber to multiple output fibers. This Mini PLC Splitter is a 1x4 steel tube PLC splitter, with 1 input and 4 output fibers with an even split ratio across all fibers regardless of input wavelength. Micro module PLC Splitters are availble for 900µm loose tube with or without connector terminated. All Micro PLC Splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
Fiberlink provides a various of 1xN and 2xN Rack mount type PLC splitters, including 1x8, 1x16, 1x32, 1x64 PLC splitter. Rack mount PLC Splitter is terminated with SC adapter as the input and output connecting with fiber optic patch cords. All Rack Mount PLC Splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
Planar Lightwave Circuit PLC Splitter is to use silica optical waveguide technology with an even split ratio from one input fiber to multiple output fibers. This Bare Fiber PLC Splitter is a 1x2 steel tube PLC splitter, with 1 input and 2 output fibers with an even split ratio across all fibers regardless of input wavelength. Bare PLC Splitters are availble with 250μm bare fiber or 900µm loose tube without connector. -
Fiberlink offers a various of ABS box and Cassette type splitter modules and products. ABS Box PLC Splitter Modules are available in the form of either plastic module cassette (an ABS box) with ruggedized fiber jackets of 2mm, or LGX metal box for plug and play splitter applications. The PLC splitter family features the whole series of 1 x N and 2 x N splitter boxes and modules that are tailored for specific applications. All splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
FULLAXS LC Rugged FTTA Outdoor Cable Assembly is a IP67 rated outdoor connector to have protection LC duplex, MPO/MTP, SC connectors from dust and water for remote radio units and FTTA connectivity. The design of the housing and boot eases installation constraints and can be easily accessed to SFP. All the connectors are factory terminated and tested. -
Mini SC FTTA Outdoor Waterproof Cable Assembly are providing a indoor and outdoor solution for FTTH network via terminating with flat drop or transitional round OSP cables. The connector interface is an SC/APC type within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The Mini SC waterproof fiber patch cable provides an ideal solution for direct burial, conduit or aerial installations -
ODVA-LC Outdoor IP67 Industrial DLC connector assembly is designed for outdoor waterproof connector attaches to adapter on panel of RRH. The common LC connector pair inside allows easier testing and cleaning. There are two types of connector plugs available: threaded and easy-connect bayonet. This ODVA-LC is a typical outdoor use fiber cable, suitable for different temperature and weather, especially ideal for FTTA and harsh environment use. -
Fiberlink offers Outdoor Armored PDLC Waterproof Cable Assemblies. The PDLC to DLC armored cable is used for outdoor RRU transmitting optical signal and remote fiber feeder etc. Single mode and multi mode is available for chosen. Our PDLC waterproof cables are with standard duplex LC connectors. All our cables meet the standards of IEC61754-20 and RoHS and REACH materials compliant. -
The Mini Self-supporting Flat Drop Cable offers a compact, durable, self-supporting fiber cable in an easily accessible construction. The mini flat drop cable is of a polyethylene jacket, one Single-tube and two dielectric strength members to give high crush resistance. The single-tube design can be consists of 1 to 12 colored bare fiber and strands of water swellable yarns. Self-supporting Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of FTTx network. -
Figure 8 Aerial Self-Supporting Non-amored Fiber Optic Cable (GYTC8Y), the loose tube are made of high modulus plastic (PBT), which are filled with water resistant gel. Loose Tube are stranded around the non-metallic strengthen member (FRP). Outer sheath is made of UV Resistance PE jacket. Figure 8 self-supporting structure provide high tensile strength and enables easy and Cost saving aerial installations. The Steel strand wire self-supporting member gives high tensile resistant. -
The Multi-fiber Pre-terminated Breakout Cable Assemblies are a convenient and economical alternative to running multiple fiber optic jumpers or individual fiber optic cables. It can have from 4 to 144 fibers per trunk and distribute multiple Data channels. Fiberlink offers kinds of factory pre-terminated trunk fiber optic patch cables with custom connector configurations, breakouts, labels, and jacket material types. -
FTTH Drop cable patch cord provides for quick subscriber connections. The drop cable assemblies are precision manufactured to rigorous quality standards, assure reliable performance and compatibility. The SC FTTH drop cable patch cord, apply to FTTH project corridor boxes, drop cable distribution boxes, FTTH fiber boxes and other forms of installation. -
LED Traceable Fiber patch cord provides a fast and accurate method of identifying the endpoint of optical patch cords. Each end of the Tracer fiber patch cord features a flashing light allowing technicians to visually trace individual patch cords from one end to another without pulling or affecting the patch cord. We can provide special power sources which are easily attached to the Traceable fiber patch cord. This causes the LED on each end to keep flashing 30s and stay in lit. Simple LED tool to apply power to one end of jumper to easily identify the far end of a jumper in connected area. Traceable Fiber Optic Patch Cable must be working with the power driving to identify the exact cable. -
Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTh end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation. -
Fiberlink’s 288 Cores Horizontal Optical Fiber Splice Closure are made of high density reinforced PC material. We supply different ports types, fittings and different fiber optic core numbers for horizontal fiber optic joint closure. Fiber Optic Splice Closures (FOSC) are suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Fiberlink’s Dome Fiber Splice Enclosure are made of high-strength engineering plastics, which used for direct connection during optical fiber transmission process, and provides joint connection protection, with 10 small round cable holes and 1 large cable hole. With good sealing performance, the simple installation and wide application range are the best choice for optical fiber connection. The Mini Fiber Dome Splice Closures are suitable for 144 cores optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
FOSC-GJS-D319 Heat-shrinkable Dome Optical Fiber Splice Enclosure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, or buried applications. 48 fiber or 72 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 48 to 576 fibers. The trays could be increased and reduced easily in on-site operation. -
FOSC-GJS-D317 Dome Fiber Optic Joint Closure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, or buried applications. 36 fiber or 72 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 36 to 576 fibers. The trays could be increased and reduced easily in on-site operation. -
Fiberlink’s Dome Fiber Optic Splice Closure are made of high density reinforced PC material. We supply different ports types, fittings and different fiber optic core numbers for horizontal / dome fiber optic splice closures. Fiber Optic Splice Closures (FOSC) are suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
FOSC-GJS-D308 Vertical Fiber Optic Splice Closure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, or buried applications. 12 fiber or 24 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 12 to 240 fibers. The trays could be increased and reduced easily in on-site operation. -
FLK-ISC-386 Series Inline Fiber Optic Splitter Closure is high-density 2 Inlets & 2 outlets fiber splice closure solution, which can be accommodated with 1x4 or 1x8 Micro PLC splitter. The inline fiber optic closure can be fixed with a adapter tray and 2 splice trays or splitter trays. The capacity of adapter can up to 8xSC simplex adapters, and suitable for aerial, duct or direct-buried installation. -
Dome Type Fiber Optic Splitter Enclosure is a member of dome series which can be used with 1x8 or 1x16 Micro PLC Splitter. In the optical fiber transmission process, the fiber splice enclosure are through connection and differences in the function, and the male mention cable joint connection protection; It can be used in overhead, hold pole, wall and buried installation; -
FTTH Aerial Fiber Access Terminal Closure is designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. And The aerial fiber splice closure is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection. -
The 48 Cores FTTH Fiber optic floor splice box is designed for providing full splice and perfect fiber management. With the 8 drop cable ports on bottom and 8 drop cable ports on top, the fiber floor terminal box can be also for the connection of fibers and pigtails for the fiber optic distribution. -
8 Cores Indoor Fiber splice terminal box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. The Fiber Optic Floor Box is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
8 Ports Indoor Wall mount Fiber Optic Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall outlet is made of ABS plastic and designed for use in residential and business applications for the termination of up to 8 fibers. It can hold max 8 SC simplex adapters. It is available for the distribution and terminal connection FTTx network terminal distribution.
