-
FLK-AFAT-326 Series Aerial Fiber Access Terminal Closure is a designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. And The aerial fiber splice closure is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection. -
FLK-ISC-286 Inline Splitter Closure is high-density 2-in&2-out fiber splice closure solution. Designing with a compact size of 340x220x100mm, the cabinet can be accommodated with 1x4, 1x8 and 1x16 Micro PLC splitters. The 4 ports are sized for main cable from 9 to 16mm in diameter, along with 16x3mm cables. -
AV6481 Automatic alignment Fusion splicer is mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. -
The CPRI LC Duplex Round FTTA Far Transmission Cable is used to transmit signals between BBU and RRU or between RRUs for FTTA solution. We supply FTTA outdoor fiber optic patch cord with armoured or non-armoured optional. -
Dome Fiber Splice Enclosure Up to 288Fiber is designed to allow up to 288 fiber cable splicing for outdoor backbone cabling system. It is used for direct connection during optical fiber transmission process, and provides joint connection protection, with 6 small round cable holes and 1 oval cable hole. The Heat shrinkable splice enclosure is of dome-to-base design, up to 12 pieces splice trays with excessive loose buffer storage basket, hinge for access of any splice without disturbing others trays; Fast and reliable sealing performance, easy to package multiple times. -
FLK-DSC-308M Dome Type Splitter Enclosure is a member of dome series which can be used with PLC Splitter. In the optical fiber transmission process, the products are through connection and differences in the function, and the male mention cable joint connection protection; Suitable for all kinds of different diameter of cable through and differences in; Can be used in overhead, hold pole, wall and buried installation; -
Dual 1x4 PLC Splitter LGX Module has been designed to house a Planar Lightwave Circuit (PLC) Splitter with SC/APC connections. It provides a plug-and-play method for integration in the network. The LGX Splitter Cassette features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The PLC Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors. -
E2000/APC Male-Female Fixed Optical Attenuator are commonly used in fiber optic communications to the the power level of a fiber cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 25dB. -
ESC250D Optical Fast Connector is a perfect solution for optical fiber filed working and FTTH connection with a quick assembly and stable performance. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor terminate, they can use it easily because it has no epoxy, no polishing. -
FastConnect Mini SC Fiber Terminal Box for Drop Cable is used as a termination point for the IP67 Mini SC drop cable assembly. The fiber junction closure allows 10pcs Mini SC FastConnect drop cable assembly as output ports. It provides solid protection and easy management for the FTTx network building. The fiber termination box can splice and connect the optical fibers in manhole, pole or wall mounted for both indoor and outdoor use. -
The Sumitomo FC-6S high precision Fiber cleaver is designed for field use alongside the Sumitomo splicing units. By using a rotating blade for multiple scoring positions enables a blade life of 36,000 cleaves with a cleave angle better than 0.5 degrees. The unit is constructed to be robust and field serviceable and has options such as tripod mount to enable secure platform mounting. The FC-6S is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. -
The Fiber Optic Splice Box is designed for the connection of optical fiber to pigtail and providing full splice and perfect fiber management. It has 4 splice trays, 36 splice in total, 12 drop ports. The Optical Distribution Box (ODU) is used for riser cable splicing indoor or in the street cabinet -
Fiberlink’s OTDR Launch cable box is a passive optical fiber element, usually used in the measurement realized with OTDR, in the installation or certification of optical fiber cable deployments. This launch cable box is ideal for testing optical fiber links using an OTDR which require launch and receive test cables to measure the end-to-end loss of fiber optic links. -
Fiber Optic Wall Mount Terminal Box for 4FO Patching is available for the distribution and termination of connections for various kinds of fiber optic systems. This metal fiber terminal box is compact and cost efficient design of cold rolled steel, and can be wall mounted for locations needing FTTH. This terminal mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas,to fix and splice with pigtails. -
Fiber Optic Wall Mount Terminal Box for 6FO Splicing is used up to 4 cores SC patching and 6 cores splicing for indoor Application. The metal fiber terminal box is compact and cost efficient design of cold rolled steel, and can be wall mounted for locations needing in FTTH. This Optical terminal box mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas, to fix and splice with pigtails. -
Figure 8 Aerial Self-Supporting Non-amored Fiber Optic Cable (GYTC8Y), the loose tube are made of high modulus plastic (PBT), which are filled with water resistant gel. Loose Tube are stranded around the non-metallic strengthen member (FRP). Outer sheath is made of UV Resistance PE jacket. Figure 8 self-supporting structure provide high tensile strength and enables easy and Cost saving aerial installations. The Steel strand wire self-supporting member gives high tensile resistant. -
FTTH Assembly SC Fusion splice on connector is optical fiber fast connector, which used for splicing point inside the connector end, equivalently eliminate the pigtails when splicing. The advantage is no need additional protection after splice, such as splice tray, splice closure, distribution box. In contract to the design of mechanical splice connector, it save V-groove mechanical connector maintenance and operation cost. -
Fiber optic splice box is designed for direct splicing between riser cable and horizontal cable and installed on each level of a Multi-dwelling Unit (MDU) building for fiber to the home (FTTH) applications. Optical fiber splice box provides storage for both over length and terminated fibers as well as serving as a splice point. Fiber optic terminal box provides from 12cores, 24cores, 36 cores up to 144 cores splicing for indoor or outdoor application. They can be installed for wall mount or pole mount. -
SC/APC SM Optical Fast Connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. The field assembly optical connector are available for UPC or APC polishing end face as option. -
FULLAXS LC Rugged FTTA Outdoor Cable Assembly is a IP67 rated outdoor connector to have protection LC duplex, MPO/MTP, SC connectors from dust and water for remote radio units and FTTA connectivity. The design of the housing and boot eases installation constraints and can be easily accessed to SFP. All the connectors are factory terminated and tested. -
GYXTC8Y Central Loose Tube Figure 8 Aerial Cable is suitable for installation in aerial environment for long haul communications. High tensile strength of stranded wires meet the requirement of self-supporting. It can also be used for duct and buried method. -
Half Type Fiber Splice Enclosure with 6 Entry Cable Port is suitable for 13-20mm fiber cable diameter and up to 96 fibers splicing. The Mini Half Fiber optic splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Half Type Optical Splice Closure for 8 Drop Cable Entry can provide a great protection for 96 fiber splicing point for FTTx application. This Half Type Fiber Optic Splice Closure are made of high density reinforced PP material. It can be used in aerial, wall, manhole or direct buried. It is to be Water-proof design with IP68 Protection level. -
400X Handheld Fiber Optic Inspection Microscope is used for inspecting fiber terminations, providing the most critical view of fiber and faces. 400X Optical microscope produces excellent details of scratches and contamination with its good optical performance and integrated laser safety filters. It is the clear choice for critical examination of polish quality.
