-
Fiber Optic Waterproof Pigtails are widely used in data transmission network, typical types are with 2 fiber cores, 4 fiber cores or 8, 12 fiber cores. By adopting the special structure cables and connectors, these waterproof pigtails are widely used in CATV and other applications. -
FLK-FAT-248A FTTx Fiber Access Terminal Box is used for the distribution connection of cable and fiber optic communication devices. It leads out the optic signal from drop cable to pigtails by splicing in the box. It can be used for protective connection of cable and layout pigtails, and fiber optic terminations of optic access network. It is suitable for outdoor, corridor, weak current silo or collection points of villas, for the continuing, storage and distribution of local cable or drop cable, with capacity of 24 cores or 48 cores. -
Fiberlink’s 144 cores Fiber Optic Splice Closure are made of high density reinforced PC material. We supply different ports types, fittings and different fiber optic core numbers for horizontal / dome fiber optic splice closures. Fiber Splice Enlosures are suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Universal Flat Round Drop cable with loose tube is of a polyethylene jacket, one Single-tube and two dielectric strength members to give high crush resistance for indoor/outdoor FTTH networks. The single-tube design can be consists of 1 to 12 colored bare fiber and strands of Water blocking yarns. Self-supporting Flat Round Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of FTTx network. -
Universal Central Loose tube Fiber Optic Cable 2-24F is a universal fiber optic cable that can be used for internal and external connections. The single loose tube universal cable consist of 2 to 24cores 250µm optical fibers in a single gel filled loose tube. The universal optical cable are made of non-metallic strength members and black LSZH, UV resistant jacket with ripcord. Due to its small diameter and flexibility, the universal fiber optic cable is ideal for installation in cable trays. It can be installed in modern FTTH and FTTB systems, server rooms or connections between buildings. -
Toneable Optitap SC/APC Compatible Flat Drop Cable Assembly is good designed with factory pre-terminated for FTTx solution. Factory pre-terminated flat drop cable assembly provides fast and simple “plug and play” connection. Copper conductor for easy cable detection and location in underground applications (non-toneable available). Toneable Mini Loose Tube Flat drop cable offers compact, durable, and easy to locate optical fiber solution in a really accessible construction. -
FIBERLINK Swing out Rack mount Fiber patch panel is modulized design with Swing tray inside. Each Swing tray can splice 24fibers. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management. -
FLK-LGX-SP208 Standard LGX Cassette 2x8 PLC Splitter provides a plug-and-play method for integration in the network, which eliminates any risks during installation. The LGX cassette splitter eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. -
Fiberlink’s Inline Fixed Optical Attenuator is a compact passive fiber optical component that provides accurate attenuation. The Fixed optical attenuator is packaged with fiber pigtails so that it can be easily connected into the optical fiber systems. Single mode fiber based attenuators with single window (1310nm or 1550nm) or dual window (1310&1550nm) are available. -
SC Fiber Optic Loopback is also known as loopback plug or loopback adapter, are typically used for testing the transmission capability and receiver sensitivity of network equipment. Fiber loopback cable provides system test engineers a simple but effective way of testing the transmission capability and receiver sensitivity of network equipment. Fiber Loopback Module is abosolutely an economical solution for a number of fiber optic test applications. -
SC/UPC SM Fiber Optic Fast Connector is a perfect solution for filed working and FTTH connection. Optical fast connectors are widely used for where need to quick connection, providing a quick assembly and stable performance. The field assembly optical connector are available for UPC or APC polishing end face as option. Also the connector boot provides 900um loose tube and 3.0mm simplex cable or drop cable optional. -
SC/APC FTTH Field Assembly Optical Connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. The quick fast connector are available for UPC or APC polishing optional. -
SC/APC FTTH Field assembly fast connector is used for field-installable fiber optic connector, widely used in Fiber To The Home (FTTH) access optical networks. With fast installation time and low insertion loss, the fast connector system provides a good alternative to fusion splicing. -
Fiber optical attenuator or Optical attenuator is a passive optical device that reduce the power level of an optical signal. SC Plug in Fixed Optical attenuator is used to attenuate the input optical power and avoid the distortion caused by the optical receiver due to the strong input optical power. -
SC/APC Fiber fast connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor termination. -
SC Micro Fiber Terminal Box for Drop Cable is an indoor terminal box which applied to connect the drop cable in the FTTX network. FLK-FWT-302D Fiber Optic Wall Outlet covers the capacity of 1 core, 2 cores and 4 cores and supports splicing, Mechanical connection and FMC, wall mount installation. -
FTTH Drop cable patch cord provides for quick subscriber connections. The drop cable assemblies are precision manufactured to rigorous quality standards, assure reliable performance and compatibility. The SC FTTH drop cable patch cord, apply to FTTH project corridor boxes, drop cable distribution boxes, FTTH fiber boxes and other forms of installation. -
Fiberlink's SC Auto shutter Simplex adapter comes with an automatic shutter to protect against dust and other contaminants and prevents eye exposure to lasers. The Automatic shutter SC adapter meets the growing need for eye safety and connector cleanliness in today’s networking and telecommunication platforms. They are designed for mounting in panels with rectangular cutouts come with or without flange. Our SC Auto shutter adapters are available in simplex and duplex configurations and a variety of colors and options. -
Rotary Rack Mount Fiber Patch Panel 1U ABS Plastic is special designed up to 96 fibers termination or fusion splicing in data center cabling. 1U Rotary Swing Rack Mount ODF is made of plastic ABS material and cold rolled steel pivotal bracket. The Rotary Patch Panel can pivot by up to 110° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. The Fiber adapter plate can be cusomized to be 24 ports SC Simplex, or SC Duplex or LC Quad adapters. -
Rotary Fiber Patch Panel 1U for 24 SC Splice is good designed for either to support termination or fusion splicing of the fibers. It is made of cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. The Rotary Swing Rack Mount ODF is ideal for indoor fiber optic cables connection storage, distribution and management. -
FLK-OPM630 Series Portable Optical Power Meter is an accurate and durable hand held meter designed for the installation, operation and maintenance of optical fiber network. It is a compact device with back light switch and auto power on-off ability. Besides, it provides ultra-wide measurement range, high accuracy, user self-calibration function and universal port. In addition, it displays linear indicators (mW) and non-linear indicators (dBm) in one screen at the same time. -
FLK-OLS-830 Series Portable Optical Light Source is a handheld optical light source that provides 1310nm and 1550nm dual-wavelength laser output for single mode fiber measurements. With the use of optical power meter, you can measure the optical loss and connection loss of optical fiber system, which can help to evaluate the transmission quality of optical fiber link and fault handling. -
Pen Type VFL 50mW Visual Fault Locator is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification. -
Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTh end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation. -
Fiberlink offers Outdoor Armored PDLC Waterproof Cable Assemblies. The PDLC to DLC armored cable is used for outdoor RRU transmitting optical signal and remote fiber feeder etc. Single mode and multi mode is available for chosen. Our PDLC waterproof cables are with standard duplex LC connectors. All our cables meet the standards of IEC61754-20 and RoHS and REACH materials compliant. -
FTTH Outdoor Wall mount Fiber Distribution Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This fiber distribution box is typically used with 1x8 or 1x16 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. Anti-UV,Ultra violet resistant and rainfall resistant. -
Outdoor Figure 8 Flat Drop cable is a cable designed specifically for FTTH project. It adopts double reinforcement figure 8 structure, the optical fiber unit is positioned in the center, two parallel fiber reinforced steel wire are placed at two sides, then the cable is completed with a black or white color LSZH Sheath. This drop cable can directly drop into the building household from the fiber optic splice closure. -
FLK-FAT-324C Outdoor/Indoor Fiber Distribution Box is designed for directly splicing up to 144 fibers; It is also suitable for using with micro PLC Splitters. The distribution box works under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTH networks. -
The GYTA53 optical fiber cable is the steel tape armored outdoor fiber optic cable used for direct buried The tubes are filled with a water-resistant filling compound. Double sheath structure provide the cable nice properties of moisture resistance and crush resistance. Double armor structure provides cable good property of rodent-resistance. A layer of water-blocking material is applied around the cable core to prevent water ingress. It can be used for duct and direct buried application. -
OM3 Plenum Armored Spiral Steel Distribution Cable, is put 900um or 600um tight buffer fibers wrapped a layer of Spiral Stainless steel tube and add a layer of water-blocking Kevlar yarns as strength unit, finally into fiber optic cable with PVC or LSZH sheath. The fiber core is protected by a Spiral steel tube that offers easy installation and high crush resistance. The plenum armored steel fiber optic cable allow direct buried or aerial installation for indoor or outdoor environmental conditions. -
Fiberlink's OM3 8 Strands MPO to LC/UPC Fiber Fanout cable is used to transit from backbone trunk cables to fiber management racks. MPO harness cables are designed to fanout standard optical connectors directly with input MTP/MPO connectors and output usually with LC,SC,FC,E2000 and so on. The MPO fanout pigtails are 100% factory tested and the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant. -
ODVA-LC Outdoor IP67 Industrial DLC connector assembly is designed for outdoor waterproof connector attaches to adapter on panel of RRH. The common LC connector pair inside allows easier testing and cleaning. There are two types of connector plugs available: threaded and easy-connect bayonet. This ODVA-LC is a typical outdoor use fiber cable, suitable for different temperature and weather, especially ideal for FTTA and harsh environment use. -
New NAP 8xSC Fiber optic terminal box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration. This fiber optic distribution box is typically used with 1x4 or 1x8 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. -
New design 8 ports Fiber Termination Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This fiber distribution box is typically used with 1x4 or 1x8 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. Anti-UV,Ultra violet resistant and rainfall resistant. -
New Aerial 72 Core Fiber Junction Enclosure is a passive splice closure which can provide a great protection for fiber splicing point. The high quality horizontal fiber optic splice closure provides space and protection for up to 72 fibers splicing and joint. It has total 3inlet and 3 oulets on both sides. Aerial, Direct buried, Manhole, Pipeline are all available. -
New Aerial 144 Core Fiber Splice Enclosure with 6 Entry is a good splice closure which can provide a great protection for fiber splicing point. The horizontal fiber splice closure provides space and protection for up to 144 fibers splicing and joint. It has total 3inlet and 3 oulets on both sides. Aerial, Direct buried, Manhole, Pipeline are all available.
