-
FLK-FWT-301C Fiber Optic Wall Socket is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. It can be fixed with SC type auto shutter adapter. FWT-301C Fiber optic wall outlet covers the capacity of 1 core, 2 cores and supports splicing, mechanical connection and FMC, wall mounted installation. -
FLK-FTB-301D FTTH Wall mount Fiber Optic Terminal Box is a compact and cost efficient unit designed specifically for indoor FTTx applications that require 1 fiber. This FAT access terminal box mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas, to fix and splice with pigtails. -
FLK-FWT-302G Fiber Access Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall outlet is made of ABS plastic and designed for use in residential and business applications for the termination of up to 2 fibers. It can hold max one SC duplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution. -
1×8 PLC Splitter LGX Module Cassette is designed to house a Planar Lightwave Circuit (PLC) Splitter with SC/APC connections by plug and play for rack mount. The LGX Cassette Splitter features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The Optical Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors. -
The 12 colors SC/APC SM Multi-fiber pigtails are used to link the fiber optic cable with fiber optic equipment, the fiber optic pigtail with connector side is used to link the equipment, while the other side of the pigtail is melted together with the fiber cable, by melting together the fiber glasses, and it can reach a minimum insertion loss. Common types of fiber optic pigtails are usually with 0.9mm fiber cable diameter, and usually installed inside ODF unit. -
Fiber Floor Terminal Box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. The Fiber Optic Floor Box is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
FLK-FAT-212C Fiber Access Terminal Box offers the ability to terminate 12-24 fibers housed in a strong robust ABS+PC enclosure for indoor and outdoor applications. Good designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. Each distribution box has integrated strength member tie positions and bend radius protection with the addition of a removable front door allowing for quick and easy installation. -
The Standard Air Blown Micro Fiber Cables are ultra lightweight with and small diameter and designed for metro feeder or access network to be blown into a micro duct by air-blown installation. As the cable allows the deployment of currently required fiber count, the micro cable provides a lower initial investment and the flexibility to install and upgrade to the latest fiber technologies after the initial installation. -
144 cores Dome type fiber Splice Closure are made of high density reinforced PC material. We supply different ports types, fittings and different fiber optic core numbers for horizontal / dome fiber optic splice closures. Fiber Optic Splice Closures are suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Standard 144 Cores Horizontal fiber optic splice closure are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. The high quality inline splice closure provides space and protection for the fiber optic cable splicing and joint. The horizontal splice closure are with a great sealing performance used in aerial,duct,and direct buried application. -
Fiber Optic Splice Closure is a fiber management product typically provide for good splicing and protection with outdoor fiber optical cables. Inline fiber splice enclosure is used for aerial, underground, pipeline, hand-holes assembling. The Inline type closure is also called Horizontal closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the splice closures we offered are with a great sealing performance. -
FOSC-GJS-D315M 144Cores Dome Type Mechanical Seal Fiber Splice Closure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, or buried applications. 24 fiber splice trays or 1x8, 1x16 Micro PLC splitters are pre-installed according to customer’s requirement, the splice capacity ranges from 24 to 144 fibers. The splice enclosure is sealed by mechanical. -
16 Port Fiber Optic CTO Terminal Box for Drop cable is specially designed to protect splicing joints of external drop cable termination. The fiber terminal box allows 16pcs drop cable with fast connector as output ports. Each splice tray is 24 fibers capacity, and the termination box can hold 2 splice trays for up to 48 fibers splicing. The fiber splice closure adopts modified PP material, with anti-UV, anti-aging and corrosion resistance material. The 16 cores CTO box can splice and connect the optical fibers in aerial, manhole, pole or wall mounted. -
FLK-AFAT-327 16 Port Fiber Optic Termination Box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network. The fiber terminal box allows 16pcs drop cable with fast connector as output ports. It provides solid protection and easy management for the FTTx network building. The fiber termination box can splice and connect the optical fibers in manhole, pole or wall mounted for both indoor and outdoor use. -
16 Ports CTO NAP Fiber Termination Box for Mini SC is used as Pre-connectorized optical distribution box for the feeder cable to connect with round drop cable in FTTx communication network system. The fiber terminal box allows 16pcs round drop cable with pre-connectorized IP68 Mini SC Waterproof connectors as output ports. The fiber distribution box can splice and connect the optical fibers in pole or wall mounted & aerial mounted for both indoor and outdoor use with IP65 protection level. -
16 Ports NPO CTO Fiber Distribution Box for Drop Cable is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. This FTTx fiber access termination box is an optic access point for managing up to 16 fusion splices or 16 optic adapters for FTTx access networks. -
Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This Fiber distribution box is typically used for 16 cores splicing as termination point in FTTx network cabling. -
192 FO Optical splice enclosures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. They are applicable to situations such as overhead, man-well of pipeline, embedded situation etc. -
1U Rack mount Drawer Fiber optic patch panel also named as rack mount fiber enclosure, is used to terminate 24 cores fiber termination and splicing for cross connection. This drawer rack mount fiber patch panel can meet with up to 24 fibers splicing with fiber cable management in front of adapter plate. -
Fiberlink Rack Mount Fixed Type Fiber Patch Panels are designed for either to support termination or fusion splicing of the fibers. It is made of cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. The 1U rack mount fiber patch panel can be used for 24pcs SC duplex adapters up to 48 fibers splicing. -
Fiberlink MTP/MPO 1U Rack mount Patch Panel mounts up to 4xMTP/MPO-LC cassettes in a 19" arrangement taking only 1U height. The Rack mount fibre patch panel provide easy access, connection and securing of the MTP Trunk Cables to the rear of the cassettes. Blank panels are included for the unused apertures within the patch panel. The 19"mounting brackets are adjustable to allow the panel to be set further back in the cabinet mounting frames. -
Fiberlink 1U FHD Rack Mount Fiber Patch Panels are special designed for high density termination or fusion splicing of up to 96 fibers LC connector, which can be fixed with 4pcs FHD series MTP modular cassettes or 4pcs fiber adapter panels. It is made of cold-rolled steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. -
Fiberlink 1U Sliding Rack mount fiber patch panel is used to terminate fiber optic cable or provide access to the cable’s individual fibers for cross connection. This drawer rack mount fiber patch panel can meet with up to 24 fibers splicing with fiber cable management in front of adapter plate. -
Fiberlink offers a various of ABS box and Cassette type splitter modules and products. ABS Box PLC Splitter Modules are available in the form of either plastic module cassette (an ABS box) with ruggedized fiber jackets of 2mm, or LGX metal box for plug and play splitter applications. The PLC splitter family features the whole series of 1 x N and 2 x N splitter boxes and modules that are tailored for specific applications. All splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
Planar Lightwave Circuit PLC Splitter is to use silica optical waveguide technology with an even split ratio from one input fiber to multiple output fibers. This Bare Fiber PLC Splitter is a 1x2 steel tube PLC splitter, with 1 input and 2 output fibers with an even split ratio across all fibers regardless of input wavelength. Bare PLC Splitters are availble with 250μm bare fiber or 900µm loose tube without connector. -
Fiberlink provides a various of 1xN and 2xN Rack mount type PLC splitters, including 1x8, 1x16, 1x32, 1x64 PLC splitter. Rack mount PLC Splitter is terminated with SC adapter as the input and output connecting with fiber optic patch cords. All Rack Mount PLC Splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
Planar Lightwave Circuit (PLC) Splitter is to use silica optical waveguide technology with an even split ratio from one input fiber to multiple output fibers. This Mini PLC Splitter is a 1x4 steel tube PLC splitter, with 1 input and 4 output fibers with an even split ratio across all fibers regardless of input wavelength. Micro module PLC Splitters are availble for 900µm loose tube with or without connector terminated. All Micro PLC Splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
FLK-FWT-302A Fiber Access Terminal Box is an indoor terminal applied in the FTTX network to connect the drop cable and optical devices through fiber port. FLK-FWT-302A covers the capacity of 1 core, 2 cores or 4 cores and supports splicing, Mechanical connection and FMC, wall mounted installation. -
FLK-FWT-301A Fiber Optic Wall Outlet/Socket is used in the end termination of residential buildings and villas, to fix and splice with pigtails. This Fiber optic outlet can be installed on the wall mount with adapting variety of optical connection styles; Optical fiber can be managed effectively; Our high quality fiber optic socket is suitable in home or office and it is able to provide end users with optical access or data access. -
FLK-FAT-202C Lockable Outdoor Fiber Distribution Box offers the ability to terminate 2 or 4 fibers fixed in a strong robust ABS enclosure for indoor and outdoor applications. This lockable fiber distribution box can be used with SC Simplex and LC Duplex adaptor types offering a flexible solution to the end user. In addition to the interchangeable adapters the enclosure also offers up to 4 exit points for patching cables and 1 standard cable entry point for loose tube, tight buffer, pre-terminated and steel tape armoured cable. Each enclosure has integrated strength member tie positions and bend radius protection with the addition of a removable front door allowing for quick and easy installation. -
FLK-FWT-302C Fiber optic wall outlet, also named as Fiber Optic Socket/Faceplate, is mini fiber organizers used to create a fiber connection point inside the home or office. The Fiber termination outlet is used for wall mounted or desktop applications and provides 1FO, 2FO or 4FO splicing with SC or LC connector. -
2 SC ports Fiber Access Terminal Box is the logger type Fiber Optic Wall Plates, the 2 Fiber Wall Outlet with 2 ports joint the fiber optic pigtails and drop cables during the fiber to home and fiber to desk solutions. -
FTTH Fiber Optic Splice Box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. It is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. This Fiber Floor Boxes are typically used for indoor or outdoor application of access networks. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
The Multi-fiber Pre-terminated Breakout Cable Assemblies are a convenient and economical alternative to running multiple fiber optic jumpers or individual fiber optic cables. It can have from 4 to 144 fibers per trunk and distribute multiple Data channels. Fiberlink offers kinds of factory pre-terminated trunk fiber optic patch cables with custom connector configurations, breakouts, labels, and jacket material types. -
The 24 Fiber MTP/MPO cassette module are an easy and low cost no-splice solution to transfer from multi-fiber cables to fiber optic patch cables without the use of splice on pigtails. The MPO Cassette is compact in size with SC or LC duplex port adapters at the front and MPO/MTP adapter at the back. The cassette is deployed for different installation environment and easy to install between different transmission equipment or different racks and cassette modules. -
24 Port SC Pole Mount Fiber Termination box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
