-
FastConnect Mini SC Fiber Terminal Box for Drop Cable is used as a termination point for the IP67 Mini SC drop cable assembly. The fiber junction closure allows 10pcs Mini SC FastConnect drop cable assembly as output ports. It provides solid protection and easy management for the FTTx network building. The fiber termination box can splice and connect the optical fibers in manhole, pole or wall mounted for both indoor and outdoor use. -
The Sumitomo FC-6S high precision Fiber cleaver is designed for field use alongside the Sumitomo splicing units. By using a rotating blade for multiple scoring positions enables a blade life of 36,000 cleaves with a cleave angle better than 0.5 degrees. The unit is constructed to be robust and field serviceable and has options such as tripod mount to enable secure platform mounting. The FC-6S is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. -
The Fiber Optic Splice Box is designed for the connection of optical fiber to pigtail and providing full splice and perfect fiber management. It has 4 splice trays, 36 splice in total, 12 drop ports. The Optical Distribution Box (ODU) is used for riser cable splicing indoor or in the street cabinet -
Fiberlink’s OTDR Launch cable box is a passive optical fiber element, usually used in the measurement realized with OTDR, in the installation or certification of optical fiber cable deployments. This launch cable box is ideal for testing optical fiber links using an OTDR which require launch and receive test cables to measure the end-to-end loss of fiber optic links. -
Fiber Optic Wall Mount Terminal Box for 4FO Patching is available for the distribution and termination of connections for various kinds of fiber optic systems. This metal fiber terminal box is compact and cost efficient design of cold rolled steel, and can be wall mounted for locations needing FTTH. This terminal mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas,to fix and splice with pigtails. -
Fiber Optic Wall Mount Terminal Box for 6FO Splicing is used up to 4 cores SC patching and 6 cores splicing for indoor Application. The metal fiber terminal box is compact and cost efficient design of cold rolled steel, and can be wall mounted for locations needing in FTTH. This Optical terminal box mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas, to fix and splice with pigtails. -
Figure 8 Aerial Self-Supporting Non-amored Fiber Optic Cable (GYTC8Y), the loose tube are made of high modulus plastic (PBT), which are filled with water resistant gel. Loose Tube are stranded around the non-metallic strengthen member (FRP). Outer sheath is made of UV Resistance PE jacket. Figure 8 self-supporting structure provide high tensile strength and enables easy and Cost saving aerial installations. The Steel strand wire self-supporting member gives high tensile resistant. -
FTTH Assembly SC Fusion splice on connector is optical fiber fast connector, which used for splicing point inside the connector end, equivalently eliminate the pigtails when splicing. The advantage is no need additional protection after splice, such as splice tray, splice closure, distribution box. In contract to the design of mechanical splice connector, it save V-groove mechanical connector maintenance and operation cost. -
Fiber optic splice box is designed for direct splicing between riser cable and horizontal cable and installed on each level of a Multi-dwelling Unit (MDU) building for fiber to the home (FTTH) applications. Optical fiber splice box provides storage for both over length and terminated fibers as well as serving as a splice point. Fiber optic terminal box provides from 12cores, 24cores, 36 cores up to 144 cores splicing for indoor or outdoor application. They can be installed for wall mount or pole mount. -
SC/APC SM Optical Fast Connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. The field assembly optical connector are available for UPC or APC polishing end face as option. -
FULLAXS LC Rugged FTTA Outdoor Cable Assembly is a IP67 rated outdoor connector to have protection LC duplex, MPO/MTP, SC connectors from dust and water for remote radio units and FTTA connectivity. The design of the housing and boot eases installation constraints and can be easily accessed to SFP. All the connectors are factory terminated and tested. -
GYXTC8Y Central Loose Tube Figure 8 Aerial Cable is suitable for installation in aerial environment for long haul communications. High tensile strength of stranded wires meet the requirement of self-supporting. It can also be used for duct and buried method. -
Half Type Fiber Splice Enclosure with 6 Entry Cable Port is suitable for 13-20mm fiber cable diameter and up to 96 fibers splicing. The Mini Half Fiber optic splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Half Type Optical Splice Closure for 8 Drop Cable Entry can provide a great protection for 96 fiber splicing point for FTTx application. This Half Type Fiber Optic Splice Closure are made of high density reinforced PP material. It can be used in aerial, wall, manhole or direct buried. It is to be Water-proof design with IP68 Protection level. -
400X Handheld Fiber Optic Inspection Microscope is used for inspecting fiber terminations, providing the most critical view of fiber and faces. 400X Optical microscope produces excellent details of scratches and contamination with its good optical performance and integrated laser safety filters. It is the clear choice for critical examination of polish quality. -
FLK-FIP-600P Handheld Fiber Inspection Probe provides ergonomic ease-of-use and versatile inspection of the endfaces for fiber optic male and female, single, and multi-channel connectors. Fiber Optic Inspection Probe is a portable video microscope used to examine installed fiber terminations or ensure terminations are smooth and clean. It can inspect all kinds of fiber optic terminations, especially for the female ones. It eliminates the need to access the backside of patch panels or disassemble hardware devices which prior to inspection. -
FLK-OTDR-R600 Portable Optical Time Domain Reflectometer (OTDR) is FTTx optical fiber cable-based test instrument. It has light weight, elegant appearance, small size, easiness of installation and maintenance, high-capacity built-in battery. It provides multiple built-in test wavelengths and optical testing functions like visual fault locator (VFL). As a new product specially designed for FTTx network testing, it provides site technicians with the highest performance and upgrade services. -
FLK-DSC-308H Dome Type Splitter Enclosure is a member of dome series which can be used with PLC Splitter. In the optical fiber transmission process, the products are through connection and differences in the function, and the male mention cable joint connection protection; Suitable for all kinds of different diameter of cable through and differences in; Can be used in overhead, hold pole, wall and buried installation; -
Dome Type Fiber Optic Splitter Enclosure is a member of dome series which can be used with 1x8 or 1x16 Micro PLC Splitter. In the optical fiber transmission process, the fiber splice enclosure are through connection and differences in the function, and the male mention cable joint connection protection; It can be used in overhead, hold pole, wall and buried installation; -
Fiber optic adapter, also named as fiber adapter or fiber coupler, is a special connector designed to mate or connect two ends of a fiber optic cable with high precision. Fiber adapters are widely used in optical distribution frame(ODF), optical fiber communications equipment, measuring appliance and so on. According to the types of fiber optic connectors that fiber adapters are connected, there are common adapters: SC adapter, FC adapter, ST adapter, LC adapter, MU adapter, E2000 adapter, MTP/MPO adapter etc. -
Fiber Optic Patch Cable also named as fiber optic jumper, are made from single or multi-fiber cables and pre-terminated at each end with fiber optic connectors. Fiber optic pigtails are assembled connector on one end. Fiber optic connectors on the end of fiber patch cord cables can be of various types, including FC, SC, ST, LC, MU, E2000, MTRJ, MPO, SMA, FDDI, DIN, and D4. The purpose of a Optical fiber jumper is to connect one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center. -
MPO/APC Fixed Optical Attenuator is used to reduce optical-signal electric power in all channels of 40/100G Parallel Optic Transmission, and other equipment with using MPO interconnection. It makes network's composition more concise than those of conservative way which is the connection method of attenuator independently in each channel, as downsizing the volume and saving time. This MPO Fixed Attenuator meets TIA/EIA 604-5. And IEC 61754-7 with compliance for RoHS -
Indoor Wall mount Fiber Optic Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This wall mount fiber termination box is made of metal material and designed for use in residential and business applications for the termination of up to 4-16 fibers. It can hold max. 16 SC simplex adapters. It is available for the distribution and terminal connection FTTx network terminal distribution. -
FLK-ISC-386 Series Inline Fiber Optic Splitter Closure is high-density 2 Inlets & 2 outlets fiber splice closure solution, which can be accommodated with 1x4 or 1x8 Micro PLC splitter. The inline fiber optic closure can be fixed with a adapter tray and 2 splice trays or splitter trays. The capacity of adapter can up to 8xSC simplex adapters, and suitable for aerial, duct or direct-buried installation. -
The FOSC-GJS-H508 Inline fiber splice enclosure is compact splice enclosure up to 192 cores fiber splicing, and the external components and fastening parts are all made of stainless steel;It can be reopened and reused without changing sealing sealing material;It can be used in aerial,duct,and direct buried application. -
Inner Shutter SC/APC Fiber Optic Adapter is designed, which has shutter plates inside to proof the dust and the light. Also, a real one-piece structure and a stable outer spring enable it more stable in panel. Our SC Internal shutter adapters are available in different colors with options for flange or flangeless body. -
LC 8-port Fiber Adapter Flangeless is designed for high-density applications without flanges, and minimize the panel space. It connects 8 x LC connector to 8 x LC connector to extend the length of a cable run. All our fiber adapters are in Low insertional loss and good back reflection loss. -
LC Duplex or Quad Metal Fiber Adapter is in metal body with ceramic alignment sleeve for small form factor and high-density fiber optic connectivity. The LC Metal Duplex Fiber Adapter enables a direct connection to the optical fiber cable and is suitable for simple mounting in optical fiber connection boxes, cabinets and patch panels. -
Fiberlink's LC Internal shutter Quad Fiber Adapters are built with an integrated dust shutter that keeps the adapter's interior clean from dust. The shutter is 100% automatic and requires no physical handling of the shutter door. They are designed for mounting in panels with rectangular cutouts come with or without flange mount style ears. Our LC Inner shutter adapters are available in duplex and quad configurations and a variety of colors and options. -
LC to LC Outdoor Armored Patch cord Cable 4Cores is metal steel armored 5.0mm cable assenmbly which used for overhead or direct buried Installation. It provide the jacket material of TPU, LSZH, or HDPE optional. -
Fiberlink LC Duplex Adapter with Auto shutter are specially designed to suit FTTH applications. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. Auto Shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. Our LC Auto shutter adapters are available in different colors with options for flange or flangeless body. -
LC Quad Auto Shutter Fiber Adapter is ideal for the FTTH application. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. LC auto shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. -
LC SM Fiber optic loopback module is designed to provide a media of return patch for a fiber optic signal. Since transceiver has two ports for receiving and transmitting the light signal, it is necessary to test the ports to see whether they are still under operation. Fiber loopback test is the most convenient way for transceiver maintenance. -
LC/UPC SM Optical Fast Connector for filed Assembly is a perfect solution for optical fiber filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor terminate, they can use it easily because it has no epoxy, no polishing. -
LC/UPC SM Plug-in Fixed Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level.Optical attenuator is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source. -
LED Traceable Fiber patch cord provides a fast and accurate method of identifying the endpoint of optical patch cords. Each end of the Tracer fiber patch cord features a flashing light allowing technicians to visually trace individual patch cords from one end to another without pulling or affecting the patch cord. We can provide special power sources which are easily attached to the Traceable fiber patch cord. This causes the LED on each end to keep flashing 30s and stay in lit. Simple LED tool to apply power to one end of jumper to easily identify the far end of a jumper in connected area. Traceable Fiber Optic Patch Cable must be working with the power driving to identify the exact cable.
