-
MPO OM3 Fiber Optic Loopback Module Tester is typically used for test and measurement procedures in networking environments. The MPO Loopback plug is ideal for a multitude of applications that require signal looping in a MTP/MPO form factor. The MPO loopback tester connects the transceiver and receiver pairs, allowing testing to be performed on a complete link. -
Fiberlink MPO/MTP Trunk cable is designs for Data Center Applications. It is divided into round cable and flat cable with the outer diameter of 3.0 mm or 4.5 mm. The MPO trunk cables are factory pre-terminated, tested and packed along with the test reports. -
Mini Uni-Tube Air Blown Micro Cable is the uni-tube design with small size used to be blown into a micro duct. It is designed for metro feeder or access network. The outer thermoplastic layer provides a high level of protection and excellent installation properties. -
The Mini Self-supporting Flat Drop Cable offers a compact, durable, self-supporting fiber cable in an easily accessible construction. The mini flat drop cable is of a polyethylene jacket, one Single-tube and two dielectric strength members to give high crush resistance. The single-tube design can be consists of 1 to 12 colored bare fiber and strands of water swellable yarns. Self-supporting Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of FTTx network. -
Mini SC FTTA Outdoor Waterproof Cable Assembly are providing a indoor and outdoor solution for FTTH network via terminating with flat drop or transitional round OSP cables. The connector interface is an SC/APC type within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The Mini SC waterproof fiber patch cable provides an ideal solution for direct burial, conduit or aerial installations -
Mini Micro Air Blown Uni-tube Cable 1-12 fiber is the uni-tube design with small size used to be blown into a micro duct. Optical fibres are housed in a loose tube that is made of high-modulus plastic and filled with tube filling compound. Aramid yarns are placed outside the loose tube as the strength member, then a sheath with grooves is extruded. This type of cable is particularly applicable to air-blowing constructions in access networks. -
Mini Half Mechanical 96 FO Fiber Splice Enclosure is a optical splice closure which can provide a great protection for 96 fiber splicing point. The Half Type mechanical splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Mini Half 96 FO Mechanical Sealing Fiber Splice Closure is suitable for 3 entry cable ports of 8-20mm fiber cable diameter and up to 96 fibers splicing. The Half Type mechanical splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Fiberlink’s Dome Fiber Splice Enclosure are made of high-strength engineering plastics, which used for direct connection during optical fiber transmission process, and provides joint connection protection, with 10 small round cable holes and 1 large cable hole. With good sealing performance, the simple installation and wide application range are the best choice for optical fiber connection. The Mini Fiber Dome Splice Closures are suitable for 144 cores optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Fiber splice enclosure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal spilce closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the optical splice closures we offered are with a great sealing performance. -
Fiberlink’s Manual Variable Optical Attenuator (MVOA) is a device designed to attenuate an intensity or power level of an input optical beam in a controlled manner to produce an output optical beam with different attenuated intensities. The Variable optical attenuator can be used for power control and equalization for WDMs, FTTx, CATV and Test & Measurement Instruments. The VOA attenuator provides the pigtail with FC, SC, LC connector optional or without connector. -
LGX Module 1x16 PLC Splitter SC/APC is designed to house a 1x16 PLC Splitter with SC/APC connetor by plug and play for rack mount. The LGX Module PLC Splitter features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The PLC Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors. -
LED Traceable Fiber patch cord provides a fast and accurate method of identifying the endpoint of optical patch cords. Each end of the Tracer fiber patch cord features a flashing light allowing technicians to visually trace individual patch cords from one end to another without pulling or affecting the patch cord. We can provide special power sources which are easily attached to the Traceable fiber patch cord. This causes the LED on each end to keep flashing 30s and stay in lit. Simple LED tool to apply power to one end of jumper to easily identify the far end of a jumper in connected area. Traceable Fiber Optic Patch Cable must be working with the power driving to identify the exact cable. -
LC/UPC SM Plug-in Fixed Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level.Optical attenuator is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source. -
LC/UPC SM Optical Fast Connector for filed Assembly is a perfect solution for optical fiber filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor terminate, they can use it easily because it has no epoxy, no polishing. -
LC SM Fiber optic loopback module is designed to provide a media of return patch for a fiber optic signal. Since transceiver has two ports for receiving and transmitting the light signal, it is necessary to test the ports to see whether they are still under operation. Fiber loopback test is the most convenient way for transceiver maintenance. -
LC Quad Auto Shutter Fiber Adapter is ideal for the FTTH application. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. LC auto shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. -
Fiberlink LC Duplex Adapter with Auto shutter are specially designed to suit FTTH applications. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. Auto Shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. Our LC Auto shutter adapters are available in different colors with options for flange or flangeless body. -
Fiberlink's LC Internal shutter Quad Fiber Adapters are built with an integrated dust shutter that keeps the adapter's interior clean from dust. The shutter is 100% automatic and requires no physical handling of the shutter door. They are designed for mounting in panels with rectangular cutouts come with or without flange mount style ears. Our LC Inner shutter adapters are available in duplex and quad configurations and a variety of colors and options. -
LC Duplex or Quad Metal Fiber Adapter is in metal body with ceramic alignment sleeve for small form factor and high-density fiber optic connectivity. The LC Metal Duplex Fiber Adapter enables a direct connection to the optical fiber cable and is suitable for simple mounting in optical fiber connection boxes, cabinets and patch panels. -
LC 8-port Fiber Adapter Flangeless is designed for high-density applications without flanges, and minimize the panel space. It connects 8 x LC connector to 8 x LC connector to extend the length of a cable run. All our fiber adapters are in Low insertional loss and good back reflection loss. -
Inner Shutter SC/APC Fiber Optic Adapter is designed, which has shutter plates inside to proof the dust and the light. Also, a real one-piece structure and a stable outer spring enable it more stable in panel. Our SC Internal shutter adapters are available in different colors with options for flange or flangeless body. -
The FOSC-GJS-H508 Inline fiber splice enclosure is compact splice enclosure up to 192 cores fiber splicing, and the external components and fastening parts are all made of stainless steel;It can be reopened and reused without changing sealing sealing material;It can be used in aerial,duct,and direct buried application. -
FLK-ISC-386 Series Inline Fiber Optic Splitter Closure is high-density 2 Inlets & 2 outlets fiber splice closure solution, which can be accommodated with 1x4 or 1x8 Micro PLC splitter. The inline fiber optic closure can be fixed with a adapter tray and 2 splice trays or splitter trays. The capacity of adapter can up to 8xSC simplex adapters, and suitable for aerial, duct or direct-buried installation. -
Indoor Wall mount Fiber Optic Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This wall mount fiber termination box is made of metal material and designed for use in residential and business applications for the termination of up to 4-16 fibers. It can hold max. 16 SC simplex adapters. It is available for the distribution and terminal connection FTTx network terminal distribution. -
MPO/APC Fixed Optical Attenuator is used to reduce optical-signal electric power in all channels of 40/100G Parallel Optic Transmission, and other equipment with using MPO interconnection. It makes network's composition more concise than those of conservative way which is the connection method of attenuator independently in each channel, as downsizing the volume and saving time. This MPO Fixed Attenuator meets TIA/EIA 604-5. And IEC 61754-7 with compliance for RoHS -
Fiber Optic Patch Cable also named as fiber optic jumper, are made from single or multi-fiber cables and pre-terminated at each end with fiber optic connectors. Fiber optic pigtails are assembled connector on one end. Fiber optic connectors on the end of fiber patch cord cables can be of various types, including FC, SC, ST, LC, MU, E2000, MTRJ, MPO, SMA, FDDI, DIN, and D4. The purpose of a Optical fiber jumper is to connect one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center. -
Fiber optic adapter, also named as fiber adapter or fiber coupler, is a special connector designed to mate or connect two ends of a fiber optic cable with high precision. Fiber adapters are widely used in optical distribution frame(ODF), optical fiber communications equipment, measuring appliance and so on. According to the types of fiber optic connectors that fiber adapters are connected, there are common adapters: SC adapter, FC adapter, ST adapter, LC adapter, MU adapter, E2000 adapter, MTP/MPO adapter etc. -
Dome Type Fiber Optic Splitter Enclosure is a member of dome series which can be used with 1x8 or 1x16 Micro PLC Splitter. In the optical fiber transmission process, the fiber splice enclosure are through connection and differences in the function, and the male mention cable joint connection protection; It can be used in overhead, hold pole, wall and buried installation; -
FLK-DSC-308H Dome Type Splitter Enclosure is a member of dome series which can be used with PLC Splitter. In the optical fiber transmission process, the products are through connection and differences in the function, and the male mention cable joint connection protection; Suitable for all kinds of different diameter of cable through and differences in; Can be used in overhead, hold pole, wall and buried installation; -
FLK-OTDR-R600 Portable Optical Time Domain Reflectometer (OTDR) is FTTx optical fiber cable-based test instrument. It has light weight, elegant appearance, small size, easiness of installation and maintenance, high-capacity built-in battery. It provides multiple built-in test wavelengths and optical testing functions like visual fault locator (VFL). As a new product specially designed for FTTx network testing, it provides site technicians with the highest performance and upgrade services. -
FLK-FIP-600P Handheld Fiber Inspection Probe provides ergonomic ease-of-use and versatile inspection of the endfaces for fiber optic male and female, single, and multi-channel connectors. Fiber Optic Inspection Probe is a portable video microscope used to examine installed fiber terminations or ensure terminations are smooth and clean. It can inspect all kinds of fiber optic terminations, especially for the female ones. It eliminates the need to access the backside of patch panels or disassemble hardware devices which prior to inspection. -
400X Handheld Fiber Optic Inspection Microscope is used for inspecting fiber terminations, providing the most critical view of fiber and faces. 400X Optical microscope produces excellent details of scratches and contamination with its good optical performance and integrated laser safety filters. It is the clear choice for critical examination of polish quality. -
Half Type Optical Splice Closure for 8 Drop Cable Entry can provide a great protection for 96 fiber splicing point for FTTx application. This Half Type Fiber Optic Splice Closure are made of high density reinforced PP material. It can be used in aerial, wall, manhole or direct buried. It is to be Water-proof design with IP68 Protection level. -
Half Type Fiber Splice Enclosure with 6 Entry Cable Port is suitable for 13-20mm fiber cable diameter and up to 96 fibers splicing. The Mini Half Fiber optic splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
GYXTC8Y Central Loose Tube Figure 8 Aerial Cable is suitable for installation in aerial environment for long haul communications. High tensile strength of stranded wires meet the requirement of self-supporting. It can also be used for duct and buried method.
