-
Mini Micro Air Blown Uni-tube Cable 1-12 fiber is the uni-tube design with small size used to be blown into a micro duct. Optical fibres are housed in a loose tube that is made of high-modulus plastic and filled with tube filling compound. Aramid yarns are placed outside the loose tube as the strength member, then a sheath with grooves is extruded. This type of cable is particularly applicable to air-blowing constructions in access networks. -
Fiberlink’s Dome Fiber Splice Enclosure are made of high-strength engineering plastics, which used for direct connection during optical fiber transmission process, and provides joint connection protection, with 10 small round cable holes and 1 large cable hole. With good sealing performance, the simple installation and wide application range are the best choice for optical fiber connection. The Mini Fiber Dome Splice Closures are suitable for 144 cores optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Fiber splice enclosure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal spilce closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the optical splice closures we offered are with a great sealing performance. -
Fiberlink’s Manual Variable Optical Attenuator (MVOA) is a device designed to attenuate an intensity or power level of an input optical beam in a controlled manner to produce an output optical beam with different attenuated intensities. The Variable optical attenuator can be used for power control and equalization for WDMs, FTTx, CATV and Test & Measurement Instruments. The VOA attenuator provides the pigtail with FC, SC, LC connector optional or without connector. -
LGX Module 1x16 PLC Splitter SC/APC is designed to house a 1x16 PLC Splitter with SC/APC connetor by plug and play for rack mount. The LGX Module PLC Splitter features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The PLC Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors. -
LED Traceable Fiber patch cord provides a fast and accurate method of identifying the endpoint of optical patch cords. Each end of the Tracer fiber patch cord features a flashing light allowing technicians to visually trace individual patch cords from one end to another without pulling or affecting the patch cord. We can provide special power sources which are easily attached to the Traceable fiber patch cord. This causes the LED on each end to keep flashing 30s and stay in lit. Simple LED tool to apply power to one end of jumper to easily identify the far end of a jumper in connected area. Traceable Fiber Optic Patch Cable must be working with the power driving to identify the exact cable. -
LC/UPC SM Plug-in Fixed Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level.Optical attenuator is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source. -
LC SM Fiber optic loopback module is designed to provide a media of return patch for a fiber optic signal. Since transceiver has two ports for receiving and transmitting the light signal, it is necessary to test the ports to see whether they are still under operation. Fiber loopback test is the most convenient way for transceiver maintenance. -
LC Quad Auto Shutter Fiber Adapter is ideal for the FTTH application. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. LC auto shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. -
Fiberlink LC Duplex Adapter with Auto shutter are specially designed to suit FTTH applications. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. Auto Shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. Our LC Auto shutter adapters are available in different colors with options for flange or flangeless body. -
Fiberlink's LC Internal shutter Quad Fiber Adapters are built with an integrated dust shutter that keeps the adapter's interior clean from dust. The shutter is 100% automatic and requires no physical handling of the shutter door. They are designed for mounting in panels with rectangular cutouts come with or without flange mount style ears. Our LC Inner shutter adapters are available in duplex and quad configurations and a variety of colors and options. -
Inner Shutter SC/APC Fiber Optic Adapter is designed, which has shutter plates inside to proof the dust and the light. Also, a real one-piece structure and a stable outer spring enable it more stable in panel. Our SC Internal shutter adapters are available in different colors with options for flange or flangeless body.
