-
MPO OM3 Fiber Optic Loopback Module Tester is typically used for test and measurement procedures in networking environments. The MPO Loopback plug is ideal for a multitude of applications that require signal looping in a MTP/MPO form factor. The MPO loopback tester connects the transceiver and receiver pairs, allowing testing to be performed on a complete link. -
Fiberlink MPO/MTP Trunk cable is designs for Data Center Applications. It is divided into round cable and flat cable with the outer diameter of 3.0 mm or 4.5 mm. The MPO trunk cables are factory pre-terminated, tested and packed along with the test reports. -
Mini Uni-Tube Air Blown Micro Cable is the uni-tube design with small size used to be blown into a micro duct. It is designed for metro feeder or access network. The outer thermoplastic layer provides a high level of protection and excellent installation properties. -
The Mini Self-supporting Flat Drop Cable offers a compact, durable, self-supporting fiber cable in an easily accessible construction. The mini flat drop cable is of a polyethylene jacket, one Single-tube and two dielectric strength members to give high crush resistance. The single-tube design can be consists of 1 to 12 colored bare fiber and strands of water swellable yarns. Self-supporting Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of FTTx network. -
Mini SC FTTA Outdoor Waterproof Cable Assembly are providing a indoor and outdoor solution for FTTH network via terminating with flat drop or transitional round OSP cables. The connector interface is an SC/APC type within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The Mini SC waterproof fiber patch cable provides an ideal solution for direct burial, conduit or aerial installations -
Mini Micro Air Blown Uni-tube Cable 1-12 fiber is the uni-tube design with small size used to be blown into a micro duct. Optical fibres are housed in a loose tube that is made of high-modulus plastic and filled with tube filling compound. Aramid yarns are placed outside the loose tube as the strength member, then a sheath with grooves is extruded. This type of cable is particularly applicable to air-blowing constructions in access networks. -
Mini Half Mechanical 96 FO Fiber Splice Enclosure is a optical splice closure which can provide a great protection for 96 fiber splicing point. The Half Type mechanical splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Mini Half 96 FO Mechanical Sealing Fiber Splice Closure is suitable for 3 entry cable ports of 8-20mm fiber cable diameter and up to 96 fibers splicing. The Half Type mechanical splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Fiberlink’s Dome Fiber Splice Enclosure are made of high-strength engineering plastics, which used for direct connection during optical fiber transmission process, and provides joint connection protection, with 10 small round cable holes and 1 large cable hole. With good sealing performance, the simple installation and wide application range are the best choice for optical fiber connection. The Mini Fiber Dome Splice Closures are suitable for 144 cores optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Fiber splice enclosure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal spilce closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the optical splice closures we offered are with a great sealing performance. -
Fiberlink’s Manual Variable Optical Attenuator (MVOA) is a device designed to attenuate an intensity or power level of an input optical beam in a controlled manner to produce an output optical beam with different attenuated intensities. The Variable optical attenuator can be used for power control and equalization for WDMs, FTTx, CATV and Test & Measurement Instruments. The VOA attenuator provides the pigtail with FC, SC, LC connector optional or without connector. -
LGX Module 1x16 PLC Splitter SC/APC is designed to house a 1x16 PLC Splitter with SC/APC connetor by plug and play for rack mount. The LGX Module PLC Splitter features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The PLC Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors.
