-
Fiberlink offers Outdoor Armored PDLC Waterproof Cable Assemblies. The PDLC to DLC armored cable is used for outdoor RRU transmitting optical signal and remote fiber feeder etc. Single mode and multi mode is available for chosen. Our PDLC waterproof cables are with standard duplex LC connectors. All our cables meet the standards of IEC61754-20 and RoHS and REACH materials compliant. -
FTTH Outdoor Wall mount Fiber Distribution Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This fiber distribution box is typically used with 1x8 or 1x16 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. Anti-UV,Ultra violet resistant and rainfall resistant. -
Outdoor Figure 8 Flat Drop cable is a cable designed specifically for FTTH project. It adopts double reinforcement figure 8 structure, the optical fiber unit is positioned in the center, two parallel fiber reinforced steel wire are placed at two sides, then the cable is completed with a black or white color LSZH Sheath. This drop cable can directly drop into the building household from the fiber optic splice closure. -
FLK-FAT-324C Outdoor/Indoor Fiber Distribution Box is designed for directly splicing up to 144 fibers; It is also suitable for using with micro PLC Splitters. The distribution box works under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTH networks. -
The GYTA53 optical fiber cable is the steel tape armored outdoor fiber optic cable used for direct buried The tubes are filled with a water-resistant filling compound. Double sheath structure provide the cable nice properties of moisture resistance and crush resistance. Double armor structure provides cable good property of rodent-resistance. A layer of water-blocking material is applied around the cable core to prevent water ingress. It can be used for duct and direct buried application. -
OM3 Plenum Armored Spiral Steel Distribution Cable, is put 900um or 600um tight buffer fibers wrapped a layer of Spiral Stainless steel tube and add a layer of water-blocking Kevlar yarns as strength unit, finally into fiber optic cable with PVC or LSZH sheath. The fiber core is protected by a Spiral steel tube that offers easy installation and high crush resistance. The plenum armored steel fiber optic cable allow direct buried or aerial installation for indoor or outdoor environmental conditions. -
Fiberlink's OM3 8 Strands MPO to LC/UPC Fiber Fanout cable is used to transit from backbone trunk cables to fiber management racks. MPO harness cables are designed to fanout standard optical connectors directly with input MTP/MPO connectors and output usually with LC,SC,FC,E2000 and so on. The MPO fanout pigtails are 100% factory tested and the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant. -
ODVA-LC Outdoor IP67 Industrial DLC connector assembly is designed for outdoor waterproof connector attaches to adapter on panel of RRH. The common LC connector pair inside allows easier testing and cleaning. There are two types of connector plugs available: threaded and easy-connect bayonet. This ODVA-LC is a typical outdoor use fiber cable, suitable for different temperature and weather, especially ideal for FTTA and harsh environment use. -
New NAP 8xSC Fiber optic terminal box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration. This fiber optic distribution box is typically used with 1x4 or 1x8 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. -
New design 8 ports Fiber Termination Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This fiber distribution box is typically used with 1x4 or 1x8 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. Anti-UV,Ultra violet resistant and rainfall resistant. -
New Aerial 72 Core Fiber Junction Enclosure is a passive splice closure which can provide a great protection for fiber splicing point. The high quality horizontal fiber optic splice closure provides space and protection for up to 72 fibers splicing and joint. It has total 3inlet and 3 oulets on both sides. Aerial, Direct buried, Manhole, Pipeline are all available. -
New Aerial 144 Core Fiber Splice Enclosure with 6 Entry is a good splice closure which can provide a great protection for fiber splicing point. The horizontal fiber splice closure provides space and protection for up to 144 fibers splicing and joint. It has total 3inlet and 3 oulets on both sides. Aerial, Direct buried, Manhole, Pipeline are all available.
