-
FULLAXS LC Rugged FTTA Outdoor Cable Assembly is a IP67 rated outdoor connector to have protection LC duplex, MPO/MTP, SC connectors from dust and water for remote radio units and FTTA connectivity. The design of the housing and boot eases installation constraints and can be easily accessed to SFP. All the connectors are factory terminated and tested. -
SC/APC SM Optical Fast Connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. The field assembly optical connector are available for UPC or APC polishing end face as option. -
Fiber optic splice box is designed for direct splicing between riser cable and horizontal cable and installed on each level of a Multi-dwelling Unit (MDU) building for fiber to the home (FTTH) applications. Optical fiber splice box provides storage for both over length and terminated fibers as well as serving as a splice point. Fiber optic terminal box provides from 12cores, 24cores, 36 cores up to 144 cores splicing for indoor or outdoor application. They can be installed for wall mount or pole mount. -
FTTH Assembly SC Fusion splice on connector is optical fiber fast connector, which used for splicing point inside the connector end, equivalently eliminate the pigtails when splicing. The advantage is no need additional protection after splice, such as splice tray, splice closure, distribution box. In contract to the design of mechanical splice connector, it save V-groove mechanical connector maintenance and operation cost. -
Figure 8 Aerial Self-Supporting Non-amored Fiber Optic Cable (GYTC8Y), the loose tube are made of high modulus plastic (PBT), which are filled with water resistant gel. Loose Tube are stranded around the non-metallic strengthen member (FRP). Outer sheath is made of UV Resistance PE jacket. Figure 8 self-supporting structure provide high tensile strength and enables easy and Cost saving aerial installations. The Steel strand wire self-supporting member gives high tensile resistant. -
Fiber Optic Wall Mount Terminal Box for 6FO Splicing is used up to 4 cores SC patching and 6 cores splicing for indoor Application. The metal fiber terminal box is compact and cost efficient design of cold rolled steel, and can be wall mounted for locations needing in FTTH. This Optical terminal box mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas, to fix and splice with pigtails. -
Fiber Optic Wall Mount Terminal Box for 4FO Patching is available for the distribution and termination of connections for various kinds of fiber optic systems. This metal fiber terminal box is compact and cost efficient design of cold rolled steel, and can be wall mounted for locations needing FTTH. This terminal mounts easily and quickly and is well suited for low density fiber terminations and is used in the end termination of residential buildings and villas,to fix and splice with pigtails. -
Fiberlink’s OTDR Launch cable box is a passive optical fiber element, usually used in the measurement realized with OTDR, in the installation or certification of optical fiber cable deployments. This launch cable box is ideal for testing optical fiber links using an OTDR which require launch and receive test cables to measure the end-to-end loss of fiber optic links. -
The Fiber Optic Splice Box is designed for the connection of optical fiber to pigtail and providing full splice and perfect fiber management. It has 4 splice trays, 36 splice in total, 12 drop ports. The Optical Distribution Box (ODU) is used for riser cable splicing indoor or in the street cabinet -
The Sumitomo FC-6S high precision Fiber cleaver is designed for field use alongside the Sumitomo splicing units. By using a rotating blade for multiple scoring positions enables a blade life of 36,000 cleaves with a cleave angle better than 0.5 degrees. The unit is constructed to be robust and field serviceable and has options such as tripod mount to enable secure platform mounting. The FC-6S is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. -
FastConnect Mini SC Fiber Terminal Box for Drop Cable is used as a termination point for the IP67 Mini SC drop cable assembly. The fiber junction closure allows 10pcs Mini SC FastConnect drop cable assembly as output ports. It provides solid protection and easy management for the FTTx network building. The fiber termination box can splice and connect the optical fibers in manhole, pole or wall mounted for both indoor and outdoor use. -
ESC250D Optical Fast Connector is a perfect solution for optical fiber filed working and FTTH connection with a quick assembly and stable performance. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor terminate, they can use it easily because it has no epoxy, no polishing. -
E2000/APC Male-Female Fixed Optical Attenuator are commonly used in fiber optic communications to the the power level of a fiber cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 25dB. -
Dual 1x4 PLC Splitter LGX Module has been designed to house a Planar Lightwave Circuit (PLC) Splitter with SC/APC connections. It provides a plug-and-play method for integration in the network. The LGX Splitter Cassette features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The PLC Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors. -
FLK-DSC-308M Dome Type Splitter Enclosure is a member of dome series which can be used with PLC Splitter. In the optical fiber transmission process, the products are through connection and differences in the function, and the male mention cable joint connection protection; Suitable for all kinds of different diameter of cable through and differences in; Can be used in overhead, hold pole, wall and buried installation; -
Dome Fiber Splice Enclosure Up to 288Fiber is designed to allow up to 288 fiber cable splicing for outdoor backbone cabling system. It is used for direct connection during optical fiber transmission process, and provides joint connection protection, with 6 small round cable holes and 1 oval cable hole. The Heat shrinkable splice enclosure is of dome-to-base design, up to 12 pieces splice trays with excessive loose buffer storage basket, hinge for access of any splice without disturbing others trays; Fast and reliable sealing performance, easy to package multiple times. -
The CPRI LC Duplex Round FTTA Far Transmission Cable is used to transmit signals between BBU and RRU or between RRUs for FTTA solution. We supply FTTA outdoor fiber optic patch cord with armoured or non-armoured optional. -
AV6481 Automatic alignment Fusion splicer is mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. -
FLK-ISC-286 Inline Splitter Closure is high-density 2-in&2-out fiber splice closure solution. Designing with a compact size of 340x220x100mm, the cabinet can be accommodated with 1x4, 1x8 and 1x16 Micro PLC splitters. The 4 ports are sized for main cable from 9 to 16mm in diameter, along with 16x3mm cables. -
FLK-AFAT-326 Series Aerial Fiber Access Terminal Closure is a designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. And The aerial fiber splice closure is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection. -
The FOSC-GJS-D309 Dome Splice enlosure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, direct-buried and pole mount applications. 12 fiber or 24 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 24 to 96 fibers. -
The FOSC-GJS-D304 Dome Fiber Optic Splice Enclosure is used in aerial, wall-mounting applications, for the straight-through and branching splice of the fiber cable. The splice closure is up to 96 fibers splicing with five entry ports (four round ports and one oval port). The shell of the product is made from ABS. The shell and the base are sealed by pressing the silicone rubber with clamp allocated. The entry ports are sealed by heat-shrinkable tube. -
The FOSC-GJS-H504 Inline Mechanical Optical Splice closure is used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. The high quality horizontal optical splice closure provides space and protection for up to 96 fibers splicing and joint. The horizontal splice enclosure are with a great sealing performance used in aerial, duct, and direct buried application. -
Fiber splice enclosure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal spilce closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the optical splice closures we offered are with a great sealing performance. -
FTTH Aerial Fiber Access Terminal Closure is designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. And The aerial fiber splice closure is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection. -
8 Ports Indoor Wall mount Fiber Optic Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall outlet is made of ABS plastic and designed for use in residential and business applications for the termination of up to 8 fibers. It can hold max 8 SC simplex adapters. It is available for the distribution and terminal connection FTTx network terminal distribution. -
FLK-FAT-208A1, 8 Ports FTTH Fiber Access Terminal Box is designed to provide protection for fiber optic connectors and splices in indoor or outdoor environments. The enclosure has a built in, Swing-out mini splice tray plus a bulkhead panel with SC ports. 2 or 3 Cable access ports with built in weather-tight grommets allow for easy cable installation. -
FLK-AFAT-328 Aerial Fiber Terminal Closure is specially designed to protect splicing joints of drop cable termination. The fiber terminal closure allows 8pcs drop cable with fast connector as output ports. Each splice tray is 12 fibers capacity, and the termination box can hold 3 splice trays for up to 36 fibers splicing. The fiber splice closure adopts modified PP material, with anti-UV, anti-aging and corrosion resistance material. The optical enclosure can splice and connect the optical fibers in aerial, manhole, pole or wall mounted. -
8 Cores Indoor Fiber splice terminal box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. The Fiber Optic Floor Box is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
8 Cores FTTH CTO Fiber termination box for drop cable is a new designed for a distribution box and a termination point for the feeder cable to connect with drop cable in FTTX network system. The CTO FTTH fiber termination box has 3 main cable ports for 12mm diameter and 8 drop cable ports. The fiber terminal closure accommodates up to 24 fusion splices (or 8 mechanical splices), one 1x8 PLC splitters and 8 SC adapters. The fiber distribution box are made of high performance plastic material, and suitable for aerial, wall mount and pole mount with indoor/outdoor environment application. -
8 Cores CTO BPO Fiber Optic Terminal Box is used as Pre-connectorized optical distribution box for the feeder cable to connect with round drop cable in FTTx communication network system. The fiber terminal box allows 8pcs round drop cable with pre-connectorized IP68 Mini SC Waterproof connectors as output ports. The fiber distribution box can splice and connect the optical fibers in pole or wall mounted & aerial mounted for both indoor and outdoor use with IP65 protection level. -
72 Ports Slide-out Rack Mount Fiber Patch Panel can be used to terminate and distribute optical fiber cables. This termination box is 3U size and its capacity is 72 ports. They are convenient equipment to organize and connect the fiber optic links. It is suitable for the use in telecommunication network, central office optical cable system and premise fiber networks. -
FOSC-GJS-D319 Heat-shrinkable Dome Optical Fiber Splice Enclosure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, or buried applications. 48 fiber or 72 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 48 to 576 fibers. The trays could be increased and reduced easily in on-site operation. -
Fiberlink's 4U Ultra High-Density (UHD) Rack Mount Fiber Enclosure houses up to 12pcs UHD Series drawer fiber adapter panels. Each Drawer Fiber Adapter Panel is designed for 12pcs SC Duplex adapters with one 24cores splice tray. The 4U High-Density Rack mount Fiber Enclosure can be used for 288 SC fiber splicing for every 4U space. It provides high density flexible system for managing fiber terminations, connections, and patching in data center application to maximizing rack space utilization and minimizing floor space. -
FIBERLINK 48 Ports Slide-out Rack mount fiber splice enclosure with transparent cover is designed for standard 19" or 23" rack-mount, suitable for ST, SC, LC, MTRJ, FC adapters. We use changeable adapter plate to fix the adapters. They are suitable for different kinds of equipment which is designed according to 19’’ cabinet. It is available for the distribution and terminal connection of various kinds of optical fiber system. -
Fiber optic patch panel also named as rack mount fiber enclosure or fiber distribution panel, is used to terminate the fiber optic cable or provide access to the cable’s individual fibers for cross connection. This drawer rack mount fiber patch panel can meet with up to 48 fibers splicing with fiber cable management in front of adapter plate.
