-
Plastic Din Rail Mount Fiber Patch Panel provides an effective solution for control panels and distribution cabinets where DIN mounted equipment is used. The cable entry is from the bottom of the enclosure which allows 1 cable to be secured using a cable gland. The Din Rail Mount Fiber Enclosue can be loaded with a variety of adapters like ST, SC and LC. -
Pull-out 2U Rack Mount Fiber Patch Panel is designed with 1U, 2U, 3U, and 4U heights, which are suitable for 24, 48, 72 and 96 fibers distribution. The Pull-out Rack Mount ODF is made of cold-roll steel box, with special plastic splice cassette inside. Sliding Rack mount ODF Chassis with 19 or 21 inch mounting ears can be installed in a cabinet or rack. -
10FO Mini SC Aerial Fiber Terminal Box for Drop Cable is used for the feeder cable to connect with round drop cable in FTTx network system. The Aerial fiber terminal box allows 10pcs drop cable with pre-connectorized IP68 Mini SC Waterproof connectors as output ports. The fiber splice enclosure can splice and connect the optical fibers in pole or wall mounted & aerial mounted for both indoor and outdoor use with IP68 protection level. -
16FO Mini SC Aerial Fiber Terminal Box for Drop Cable is used for the feeder cable to connect with round drop cable in FTTx network system. The Aerial fiber terminal box allows 16pcs drop cable with pre-connectorized IP68 Mini SC Waterproof connectors as output ports. The fiber splice enclosure can splice and connect the optical fibers in pole or wall mounted & aerial mounted for both indoor and outdoor use with IP68 protection level. -
8FO Mini SC Aerial Fiber Terminal Box for Drop Cable is used for the feeder cable to connect with round drop cable in FTTx network system. The Aerial fiber terminal box allows 8pcs round drop cable with pre-connectorized IP68 Mini SC Waterproof connectors as output ports. The fiber splice enclosure can splice and connect the optical fibers in pole or wall mounted & aerial mounted for both indoor and outdoor use with IP68 protection level. -
LC to LC Outdoor Armored Patch cord Cable 4Cores is metal steel armored 5.0mm cable assenmbly which used for overhead or direct buried Installation. It provide the jacket material of TPU, LSZH, or HDPE optional. -
24 FO Fiber Optic Floor Splice Box For Uncut Cable is designed for 24 cores riser fiber splicing in the floor termination for FTTH networks. The Fiber Optic Splice Termination Box is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
3U 144FO SC High Density Rotary Fiber Patch Panel is ideal design for fiber termination and distrubtion cable splicing in data center system. 3U Rotay high density ODF is made of cold roll steel, splice tray can be rotated out. The fiber adapter plate is designed with 45 angle degree, it could be pre-terminated with various kinds of fiber optic adapters and pigtails. -
3U High Density Rotary Fiber Patch Panel Up to 144FO is ideal design for fiber termination and distrubtion cable splicing in data center system. 3U Rotay high density ODF is made of cold roll steel, splice tray can be rotated out. It could be pre-terminated with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management. -
Rotary Rack Mount Fiber Patch Panel 1U ABS Plastic is special designed up to 96 fibers termination or fusion splicing in data center cabling. 1U Rotary Swing Rack Mount ODF is made of plastic ABS material and cold rolled steel pivotal bracket. The Rotary Patch Panel can pivot by up to 110° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. The Fiber adapter plate can be cusomized to be 24 ports SC Simplex, or SC Duplex or LC Quad adapters. -
Rotary Fiber Patch Panel 1U for 24 SC Splice is good designed for either to support termination or fusion splicing of the fibers. It is made of cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. The Rotary Swing Rack Mount ODF is ideal for indoor fiber optic cables connection storage, distribution and management. -
1U Rack Mount Drawer Fiber Patch Panel is used to terminate fiber optic cable or provide access to the cable’s individual fibers for cross connection. This 1U Drawer Rack Mount Fiber Patch Enclosure can be customized with front cable managerment tray as optional. The Drawer Rack mount ODF is suitable for different kinds of equipment which is designed according to 19’’ cabinet. It is available for the distribution and terminal connection of various kinds of optical fiber system. -
1U Drawer Rack Mount Optical Patch Panel is used to terminate fiber optic cable or provide access to the cable’s individual fibers for cross connection. Rack mount fiber patch panel with drawer is designed for standard 19’’ rack-mount, suitable for ST, SC, LC, MTRJ, FC adapters. We use changeable adapter plate to fix the adapters. It is available for the distribution and terminal connection of various kinds of optical fiber system. -
1U Drawer Type Rack Mount Fiber Patch Panel provides 24 cores fiber splicing and termination with indoor distribution fiber cable. It is designed for standard 19’’ rack-mount, suitable for SC, LC, ST, FC adapters. We use changeable adapter plate to meet with differeent adapters connection. Drawer Type ODF is suitable for different kinds of equipment which is designed according to 19’’ cabinet. It is available for the distribution and terminal connection of various kinds of optical fiber system. -
1U 24ports Rack Mount Sliding Fiber Patch Panel can hold up to 24 cores fiber splicing and termination with indoor distribution fiber cable. Equipped with a removable tray with front fiber holder, this drawer ODF facilitates orderly management of terminations. It can accommodate up to 24 fibers via SC, LC, ST, FC Simplex adapters. The Drawer Rack mount ODF is supplied complete of 19 "and 21" bracket kits. -
288 Fibers Dome Fiber optic splice enclosure is of dome-to-base design, up to Max. 288 fibers splicing of 12 pieces splice trays. The dome splice closure are made of high-strength engineering PP+GF plastics, which used for direct connection during optical fiber transmission process, and provides joint connection protection, with 6 small round cable holes and 1 oval cable hole. -
24 SC Multipurpose Fiber Termination Box for FTTx is used to provide a flexible platform to address the multitude of FTTx installations. The Fiber Access Terminal Box can be deliver with pre-installed SC adaptors. Easy to install and is capable of being mounted directly to standard electrical junction boxes or directly to wall. The optical terminal box interior can be configured to address slack storage, splicing, cross connect, hardened adaptor applications or any combination. The Fiber Termination box kit includes all the necessary accessories–parts for complete box installation. -
LC Duplex or Quad Metal Fiber Adapter is in metal body with ceramic alignment sleeve for small form factor and high-density fiber optic connectivity. The LC Metal Duplex Fiber Adapter enables a direct connection to the optical fiber cable and is suitable for simple mounting in optical fiber connection boxes, cabinets and patch panels. -
LC 8-port Fiber Adapter Flangeless is designed for high-density applications without flanges, and minimize the panel space. It connects 8 x LC connector to 8 x LC connector to extend the length of a cable run. All our fiber adapters are in Low insertional loss and good back reflection loss. -
LC/UPC SM Optical Fast Connector for filed Assembly is a perfect solution for optical fiber filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor terminate, they can use it easily because it has no epoxy, no polishing. -
ESC250D Optical Fast Connector is a perfect solution for optical fiber filed working and FTTH connection with a quick assembly and stable performance. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor terminate, they can use it easily because it has no epoxy, no polishing. -
2 Ports SC Fiber Optic Wall Socket Face Plate offers 2 SC shutter adapters for connecting with max 2-4 drop cable pigtails of 3-5mm diameter. Fiber optic wall outlet covers the capacity of 1 core or 2 cores and supports splicing, Mechanical connection and FMC, wall mounted installation. -
2FO SC Auto Shutter Fiber Optic Wall Outlet is an indoor terminal box which applied to fixed 2pcs SC Auto Shutter Adapters in FTTR indoor application. This fiber wall outlet is made of ABS plastic and designed for use in residential and business applications for the termination of up to 2 fibers. It can hold Max. two SC Auto Shutter adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution. -
SC Micro Fiber Terminal Box for Drop Cable is an indoor terminal box which applied to connect the drop cable in the FTTX network. FLK-FWT-302D Fiber Optic Wall Outlet covers the capacity of 1 core, 2 cores and 4 cores and supports splicing, Mechanical connection and FMC, wall mount installation.
