Fiber Optic Attenuator

Fiberlink offers various kinds of Fiber Optic Attenuators from 1dB to 30dB with SC, LC, FC, ST, E2000.

  • MPO/APC Fixed Optical Attenuator is used to reduce optical-signal electric power in all channels of 40/100G Parallel Optic Transmission, and other equipment with using MPO interconnection. It makes network's composition more concise than those of conservative way which is the connection method of attenuator independently in each channel, as downsizing the volume and saving time. This MPO Fixed Attenuator meets TIA/EIA 604-5. And IEC 61754-7 with compliance for RoHS
  • Fiberlink’s Inline Fixed Optical Attenuator is a compact passive fiber optical component that provides accurate attenuation. The Fixed optical attenuator is packaged with fiber pigtails so that it can be easily connected into the optical fiber systems. Single mode fiber based attenuators with single window (1310nm or 1550nm) or dual window (1310&1550nm) are available.
  • Fiberlink’s Manual Variable Optical Attenuator (MVOA) is a device designed to attenuate an intensity or power level of an input optical beam in a controlled manner to produce an output optical beam with different attenuated intensities. The Variable optical attenuator can be used for power control and equalization for WDMs, FTTx, CATV and Test & Measurement Instruments. The VOA attenuator provides the pigtail with FC, SC, LC connector optional or without connector.
  • E2000/APC Male-Female Fixed Optical Attenuator are commonly used in fiber optic communications to the the power level of a fiber cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 25dB.
  • LC/UPC SM Plug-in Fixed Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level.Optical attenuator is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source.
  • Fiber optical attenuator or Optical attenuator is a passive optical device that reduce the power level of an optical signal. SC Plug in Fixed Optical attenuator is used to attenuate the input optical power and avoid the distortion caused by the optical receiver due to the strong input optical power.

Title

Go to Top