-
Planar Lightwave Circuit PLC Splitter is to use silica optical waveguide technology with an even split ratio from one input fiber to multiple output fibers. This Bare Fiber PLC Splitter is a 1x2 steel tube PLC splitter, with 1 input and 2 output fibers with an even split ratio across all fibers regardless of input wavelength. Bare PLC Splitters are availble with 250μm bare fiber or 900µm loose tube without connector. -
Fiberlink offers a various of ABS box and Cassette type splitter modules and products. ABS Box PLC Splitter Modules are available in the form of either plastic module cassette (an ABS box) with ruggedized fiber jackets of 2mm, or LGX metal box for plug and play splitter applications. The PLC splitter family features the whole series of 1 x N and 2 x N splitter boxes and modules that are tailored for specific applications. All splitters provide excellent optical performance and reliability that meet GR-1221-CORE and GR-1209-CORE specifications. -
FULLAXS LC Rugged FTTA Outdoor Cable Assembly is a IP67 rated outdoor connector to have protection LC duplex, MPO/MTP, SC connectors from dust and water for remote radio units and FTTA connectivity. The design of the housing and boot eases installation constraints and can be easily accessed to SFP. All the connectors are factory terminated and tested. -
Mini SC FTTA Outdoor Waterproof Cable Assembly are providing a indoor and outdoor solution for FTTH network via terminating with flat drop or transitional round OSP cables. The connector interface is an SC/APC type within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The Mini SC waterproof fiber patch cable provides an ideal solution for direct burial, conduit or aerial installations -
ODVA-LC Outdoor IP67 Industrial DLC connector assembly is designed for outdoor waterproof connector attaches to adapter on panel of RRH. The common LC connector pair inside allows easier testing and cleaning. There are two types of connector plugs available: threaded and easy-connect bayonet. This ODVA-LC is a typical outdoor use fiber cable, suitable for different temperature and weather, especially ideal for FTTA and harsh environment use. -
Fiberlink offers Outdoor Armored PDLC Waterproof Cable Assemblies. The PDLC to DLC armored cable is used for outdoor RRU transmitting optical signal and remote fiber feeder etc. Single mode and multi mode is available for chosen. Our PDLC waterproof cables are with standard duplex LC connectors. All our cables meet the standards of IEC61754-20 and RoHS and REACH materials compliant. -
The Mini Self-supporting Flat Drop Cable offers a compact, durable, self-supporting fiber cable in an easily accessible construction. The mini flat drop cable is of a polyethylene jacket, one Single-tube and two dielectric strength members to give high crush resistance. The single-tube design can be consists of 1 to 12 colored bare fiber and strands of water swellable yarns. Self-supporting Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of FTTx network. -
Figure 8 Aerial Self-Supporting Non-amored Fiber Optic Cable (GYTC8Y), the loose tube are made of high modulus plastic (PBT), which are filled with water resistant gel. Loose Tube are stranded around the non-metallic strengthen member (FRP). Outer sheath is made of UV Resistance PE jacket. Figure 8 self-supporting structure provide high tensile strength and enables easy and Cost saving aerial installations. The Steel strand wire self-supporting member gives high tensile resistant. -
The Multi-fiber Pre-terminated Breakout Cable Assemblies are a convenient and economical alternative to running multiple fiber optic jumpers or individual fiber optic cables. It can have from 4 to 144 fibers per trunk and distribute multiple Data channels. Fiberlink offers kinds of factory pre-terminated trunk fiber optic patch cables with custom connector configurations, breakouts, labels, and jacket material types. -
FTTH Drop cable patch cord provides for quick subscriber connections. The drop cable assemblies are precision manufactured to rigorous quality standards, assure reliable performance and compatibility. The SC FTTH drop cable patch cord, apply to FTTH project corridor boxes, drop cable distribution boxes, FTTH fiber boxes and other forms of installation. -
LED Traceable Fiber patch cord provides a fast and accurate method of identifying the endpoint of optical patch cords. Each end of the Tracer fiber patch cord features a flashing light allowing technicians to visually trace individual patch cords from one end to another without pulling or affecting the patch cord. We can provide special power sources which are easily attached to the Traceable fiber patch cord. This causes the LED on each end to keep flashing 30s and stay in lit. Simple LED tool to apply power to one end of jumper to easily identify the far end of a jumper in connected area. Traceable Fiber Optic Patch Cable must be working with the power driving to identify the exact cable. -
Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTh end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.
