-
Fiberlink's OM3 8 Strands MPO to LC/UPC Fiber Fanout cable is used to transit from backbone trunk cables to fiber management racks. MPO harness cables are designed to fanout standard optical connectors directly with input MTP/MPO connectors and output usually with LC,SC,FC,E2000 and so on. The MPO fanout pigtails are 100% factory tested and the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant. -
Fiberlink MTP/MPO 1U Rack mount Patch Panel mounts up to 4xMTP/MPO-LC cassettes in a 19" arrangement taking only 1U height. The Rack mount fibre patch panel provide easy access, connection and securing of the MTP Trunk Cables to the rear of the cassettes. Blank panels are included for the unused apertures within the patch panel. The 19"mounting brackets are adjustable to allow the panel to be set further back in the cabinet mounting frames. -
Fiber Optic Patch Cable also named as fiber optic jumper, are made from single or multi-fiber cables and pre-terminated at each end with fiber optic connectors. Fiber optic pigtails are assembled connector on one end. Fiber optic connectors on the end of fiber patch cord cables can be of various types, including FC, SC, ST, LC, MU, E2000, MTRJ, MPO, SMA, FDDI, DIN, and D4. The purpose of a Optical fiber jumper is to connect one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center. -
The 12 colors SC/APC SM Multi-fiber pigtails are used to link the fiber optic cable with fiber optic equipment, the fiber optic pigtail with connector side is used to link the equipment, while the other side of the pigtail is melted together with the fiber cable, by melting together the fiber glasses, and it can reach a minimum insertion loss. Common types of fiber optic pigtails are usually with 0.9mm fiber cable diameter, and usually installed inside ODF unit. -
Fiber Optic Waterproof Pigtails are widely used in data transmission network, typical types are with 2 fiber cores, 4 fiber cores or 8, 12 fiber cores. By adopting the special structure cables and connectors, these waterproof pigtails are widely used in CATV and other applications. -
The CPRI LC Duplex Round FTTA Far Transmission Cable is used to transmit signals between BBU and RRU or between RRUs for FTTA solution. We supply FTTA outdoor fiber optic patch cord with armoured or non-armoured optional. -
Fiber optic adapter, also named as fiber adapter or fiber coupler, is a special connector designed to mate or connect two ends of a fiber optic cable with high precision. Fiber adapters are widely used in optical distribution frame(ODF), optical fiber communications equipment, measuring appliance and so on. According to the types of fiber optic connectors that fiber adapters are connected, there are common adapters: SC adapter, FC adapter, ST adapter, LC adapter, MU adapter, E2000 adapter, MTP/MPO adapter etc. -
LC Quad Auto Shutter Fiber Adapter is ideal for the FTTH application. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. LC auto shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. -
Fiber optical attenuator or Optical attenuator is a passive optical device that reduce the power level of an optical signal. SC Plug in Fixed Optical attenuator is used to attenuate the input optical power and avoid the distortion caused by the optical receiver due to the strong input optical power. -
LC/UPC SM Plug-in Fixed Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level.Optical attenuator is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source. -
E2000/APC Male-Female Fixed Optical Attenuator are commonly used in fiber optic communications to the the power level of a fiber cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 25dB. -
SC Fiber Optic Loopback is also known as loopback plug or loopback adapter, are typically used for testing the transmission capability and receiver sensitivity of network equipment. Fiber loopback cable provides system test engineers a simple but effective way of testing the transmission capability and receiver sensitivity of network equipment. Fiber Loopback Module is abosolutely an economical solution for a number of fiber optic test applications.
