-
3U 144FO SC High Density Rotary Fiber Patch Panel is ideal design for fiber termination and distrubtion cable splicing in data center system. 3U Rotay high density ODF is made of cold roll steel, splice tray can be rotated out. The fiber adapter plate is designed with 45 angle degree, it could be pre-terminated with various kinds of fiber optic adapters and pigtails. -
3U High Density Rotary Fiber Patch Panel Up to 144FO is ideal design for fiber termination and distrubtion cable splicing in data center system. 3U Rotay high density ODF is made of cold roll steel, splice tray can be rotated out. It could be pre-terminated with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management. -
4 Ports FTTH Customer Fiber termination box is a wall-mountable premises fiber interface that provides 4 fiber ports for indoor FTTx applications. This Fiber Access Terminal (FAT) has built-in fiber management to ensure long term reliability and transmission of high speed services. The fiber wall terminal box enables the installation of either a single Blown Fibre Tube Cable with up to a 4 cores blown fibre units installed, or up to two fiber ruggedised cables to be spliced to four SC pigtails. -
FLK-FAT-204E FTTH Fiber Access Terminal Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. -
The All Dielectric Self-supporting (ADSS) Optical Fiber Cable is loose tube stranded Fiber cable, which is positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath. -
The 48 Cores FTTH Fiber optic floor splice box is designed for providing full splice and perfect fiber management. With the 8 drop cable ports on bottom and 8 drop cable ports on top, the fiber floor terminal box can be also for the connection of fibers and pigtails for the fiber optic distribution. -
48 Cores Hozitontal Fiber splice enclosure (FOSC-GJS-H528) are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. The high quality inline optical splice closure provides space and protection for the fiber optic cable splicing and joint. The horizontal splice closure are with a great sealing performance used in aerial,duct,and direct buried application. -
This Mini Inline fiber optic enclosure is suitable for cable whose diameter is 7-12mm, which splice capacity max of 48 cores. The splice closure body are made of the high quality material and with the mechanical sealing structure filled with the sealing material. It can be used in aerial,duct,and direct buried application; -
Fiber optic patch panel also named as rack mount fiber enclosure or fiber distribution panel, is used to terminate the fiber optic cable or provide access to the cable’s individual fibers for cross connection. This drawer rack mount fiber patch panel can meet with up to 48 fibers splicing with fiber cable management in front of adapter plate. -
FIBERLINK 48 Ports Slide-out Rack mount fiber splice enclosure with transparent cover is designed for standard 19" or 23" rack-mount, suitable for ST, SC, LC, MTRJ, FC adapters. We use changeable adapter plate to fix the adapters. They are suitable for different kinds of equipment which is designed according to 19’’ cabinet. It is available for the distribution and terminal connection of various kinds of optical fiber system. -
Fiberlink's 4U Ultra High-Density (UHD) Rack Mount Fiber Enclosure houses up to 12pcs UHD Series drawer fiber adapter panels. Each Drawer Fiber Adapter Panel is designed for 12pcs SC Duplex adapters with one 24cores splice tray. The 4U High-Density Rack mount Fiber Enclosure can be used for 288 SC fiber splicing for every 4U space. It provides high density flexible system for managing fiber terminations, connections, and patching in data center application to maximizing rack space utilization and minimizing floor space. -
FOSC-GJS-D319 Heat-shrinkable Dome Optical Fiber Splice Enclosure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, or buried applications. 48 fiber or 72 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 48 to 576 fibers. The trays could be increased and reduced easily in on-site operation. -
72 Ports Slide-out Rack Mount Fiber Patch Panel can be used to terminate and distribute optical fiber cables. This termination box is 3U size and its capacity is 72 ports. They are convenient equipment to organize and connect the fiber optic links. It is suitable for the use in telecommunication network, central office optical cable system and premise fiber networks. -
8 Cores CTO BPO Fiber Optic Terminal Box is used as Pre-connectorized optical distribution box for the feeder cable to connect with round drop cable in FTTx communication network system. The fiber terminal box allows 8pcs round drop cable with pre-connectorized IP68 Mini SC Waterproof connectors as output ports. The fiber distribution box can splice and connect the optical fibers in pole or wall mounted & aerial mounted for both indoor and outdoor use with IP65 protection level. -
8 Cores FTTH CTO Fiber termination box for drop cable is a new designed for a distribution box and a termination point for the feeder cable to connect with drop cable in FTTX network system. The CTO FTTH fiber termination box has 3 main cable ports for 12mm diameter and 8 drop cable ports. The fiber terminal closure accommodates up to 24 fusion splices (or 8 mechanical splices), one 1x8 PLC splitters and 8 SC adapters. The fiber distribution box are made of high performance plastic material, and suitable for aerial, wall mount and pole mount with indoor/outdoor environment application. -
8 Cores Indoor Fiber splice terminal box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. The Fiber Optic Floor Box is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
FLK-AFAT-328 Aerial Fiber Terminal Closure is specially designed to protect splicing joints of drop cable termination. The fiber terminal closure allows 8pcs drop cable with fast connector as output ports. Each splice tray is 12 fibers capacity, and the termination box can hold 3 splice trays for up to 36 fibers splicing. The fiber splice closure adopts modified PP material, with anti-UV, anti-aging and corrosion resistance material. The optical enclosure can splice and connect the optical fibers in aerial, manhole, pole or wall mounted. -
FLK-FAT-208A1, 8 Ports FTTH Fiber Access Terminal Box is designed to provide protection for fiber optic connectors and splices in indoor or outdoor environments. The enclosure has a built in, Swing-out mini splice tray plus a bulkhead panel with SC ports. 2 or 3 Cable access ports with built in weather-tight grommets allow for easy cable installation. -
8 Ports Indoor Wall mount Fiber Optic Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall outlet is made of ABS plastic and designed for use in residential and business applications for the termination of up to 8 fibers. It can hold max 8 SC simplex adapters. It is available for the distribution and terminal connection FTTx network terminal distribution. -
FTTH Aerial Fiber Access Terminal Closure is designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. And The aerial fiber splice closure is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection. -
Fiber splice enclosure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal spilce closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the optical splice closures we offered are with a great sealing performance. -
The FOSC-GJS-H504 Inline Mechanical Optical Splice closure is used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. The high quality horizontal optical splice closure provides space and protection for up to 96 fibers splicing and joint. The horizontal splice enclosure are with a great sealing performance used in aerial, duct, and direct buried application. -
The FOSC-GJS-D304 Dome Fiber Optic Splice Enclosure is used in aerial, wall-mounting applications, for the straight-through and branching splice of the fiber cable. The splice closure is up to 96 fibers splicing with five entry ports (four round ports and one oval port). The shell of the product is made from ABS. The shell and the base are sealed by pressing the silicone rubber with clamp allocated. The entry ports are sealed by heat-shrinkable tube. -
The FOSC-GJS-D309 Dome Splice enlosure can be used as joint box to protect fiber splice connection of fiber cables, and as branch application for cables of bunchy fiber and ribbon fiber. It is suitable for aerial, duct, direct-buried and pole mount applications. 12 fiber or 24 fiber splice trays are pre-installed according to customer’s requirement, the splice capacity ranges from 24 to 96 fibers.
