-
Fiberlink's OM3 8 Strands MPO to LC/UPC Fiber Fanout cable is used to transit from backbone trunk cables to fiber management racks. MPO harness cables are designed to fanout standard optical connectors directly with input MTP/MPO connectors and output usually with LC,SC,FC,E2000 and so on. The MPO fanout pigtails are 100% factory tested and the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant. -
Fiberlink MTP/MPO 1U Rack mount Patch Panel mounts up to 4xMTP/MPO-LC cassettes in a 19" arrangement taking only 1U height. The Rack mount fibre patch panel provide easy access, connection and securing of the MTP Trunk Cables to the rear of the cassettes. Blank panels are included for the unused apertures within the patch panel. The 19"mounting brackets are adjustable to allow the panel to be set further back in the cabinet mounting frames. -
Fiber Optic Patch Cable also named as fiber optic jumper, are made from single or multi-fiber cables and pre-terminated at each end with fiber optic connectors. Fiber optic pigtails are assembled connector on one end. Fiber optic connectors on the end of fiber patch cord cables can be of various types, including FC, SC, ST, LC, MU, E2000, MTRJ, MPO, SMA, FDDI, DIN, and D4. The purpose of a Optical fiber jumper is to connect one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center. -
The 12 colors SC/APC SM Multi-fiber pigtails are used to link the fiber optic cable with fiber optic equipment, the fiber optic pigtail with connector side is used to link the equipment, while the other side of the pigtail is melted together with the fiber cable, by melting together the fiber glasses, and it can reach a minimum insertion loss. Common types of fiber optic pigtails are usually with 0.9mm fiber cable diameter, and usually installed inside ODF unit. -
Fiber Optic Waterproof Pigtails are widely used in data transmission network, typical types are with 2 fiber cores, 4 fiber cores or 8, 12 fiber cores. By adopting the special structure cables and connectors, these waterproof pigtails are widely used in CATV and other applications. -
The CPRI LC Duplex Round FTTA Far Transmission Cable is used to transmit signals between BBU and RRU or between RRUs for FTTA solution. We supply FTTA outdoor fiber optic patch cord with armoured or non-armoured optional. -
Fiber optic adapter, also named as fiber adapter or fiber coupler, is a special connector designed to mate or connect two ends of a fiber optic cable with high precision. Fiber adapters are widely used in optical distribution frame(ODF), optical fiber communications equipment, measuring appliance and so on. According to the types of fiber optic connectors that fiber adapters are connected, there are common adapters: SC adapter, FC adapter, ST adapter, LC adapter, MU adapter, E2000 adapter, MTP/MPO adapter etc. -
LC Quad Auto Shutter Fiber Adapter is ideal for the FTTH application. The auto shutter is designed to prevent ingress of dust and also to prevent accidental exposure to laser. LC auto shuttered adapter utilizes the conventional split ceramic sleeve method to align fibers and thus ensures the same precision and optical performance as the normal adapter. -
Fiber optical attenuator or Optical attenuator is a passive optical device that reduce the power level of an optical signal. SC Plug in Fixed Optical attenuator is used to attenuate the input optical power and avoid the distortion caused by the optical receiver due to the strong input optical power. -
LC/UPC SM Plug-in Fixed Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level.Optical attenuator is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source. -
E2000/APC Male-Female Fixed Optical Attenuator are commonly used in fiber optic communications to the the power level of a fiber cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 25dB. -
SC Fiber Optic Loopback is also known as loopback plug or loopback adapter, are typically used for testing the transmission capability and receiver sensitivity of network equipment. Fiber loopback cable provides system test engineers a simple but effective way of testing the transmission capability and receiver sensitivity of network equipment. Fiber Loopback Module is abosolutely an economical solution for a number of fiber optic test applications. -
LC SM Fiber optic loopback module is designed to provide a media of return patch for a fiber optic signal. Since transceiver has two ports for receiving and transmitting the light signal, it is necessary to test the ports to see whether they are still under operation. Fiber loopback test is the most convenient way for transceiver maintenance. -
SC/APC Fiber fast connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor termination. -
SC/APC FTTH Field assembly fast connector is used for field-installable fiber optic connector, widely used in Fiber To The Home (FTTH) access optical networks. With fast installation time and low insertion loss, the fast connector system provides a good alternative to fusion splicing. -
AV6481 Automatic alignment Fusion splicer is mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. -
FLK-OTDR-R600 Portable Optical Time Domain Reflectometer (OTDR) is FTTx optical fiber cable-based test instrument. It has light weight, elegant appearance, small size, easiness of installation and maintenance, high-capacity built-in battery. It provides multiple built-in test wavelengths and optical testing functions like visual fault locator (VFL). As a new product specially designed for FTTx network testing, it provides site technicians with the highest performance and upgrade services. -
The Sumitomo FC-6S high precision Fiber cleaver is designed for field use alongside the Sumitomo splicing units. By using a rotating blade for multiple scoring positions enables a blade life of 36,000 cleaves with a cleave angle better than 0.5 degrees. The unit is constructed to be robust and field serviceable and has options such as tripod mount to enable secure platform mounting. The FC-6S is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. -
Fiberlink’s OTDR Launch cable box is a passive optical fiber element, usually used in the measurement realized with OTDR, in the installation or certification of optical fiber cable deployments. This launch cable box is ideal for testing optical fiber links using an OTDR which require launch and receive test cables to measure the end-to-end loss of fiber optic links. -
FLK-FIP-600P Handheld Fiber Inspection Probe provides ergonomic ease-of-use and versatile inspection of the endfaces for fiber optic male and female, single, and multi-channel connectors. Fiber Optic Inspection Probe is a portable video microscope used to examine installed fiber terminations or ensure terminations are smooth and clean. It can inspect all kinds of fiber optic terminations, especially for the female ones. It eliminates the need to access the backside of patch panels or disassemble hardware devices which prior to inspection. -
Pen Type VFL 50mW Visual Fault Locator is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification. -
FIBERLINK 48 Ports Slide-out Rack mount fiber splice enclosure with transparent cover is designed for standard 19" or 23" rack-mount, suitable for ST, SC, LC, MTRJ, FC adapters. We use changeable adapter plate to fix the adapters. They are suitable for different kinds of equipment which is designed according to 19’’ cabinet. It is available for the distribution and terminal connection of various kinds of optical fiber system. -
72 Ports Slide-out Rack Mount Fiber Patch Panel can be used to terminate and distribute optical fiber cables. This termination box is 3U size and its capacity is 72 ports. They are convenient equipment to organize and connect the fiber optic links. It is suitable for the use in telecommunication network, central office optical cable system and premise fiber networks. -
3RU High density Rack Mount Fiber Patch Panel is standard 19 inch design, cold roll steel, easy to install and manage. It is a full LGX compatible patch panel that accommodates 12 slots LGX adapter modular which have a splice tray for storage. It can be capacity of Max. 144 or 288 cores for cable inlet and fixing, fiber splicing and protecting. LGX adapter modular are pre-terminated with pigtails for fast and reliable connecting with subscribers or other devices.
