Fiber Optic Patch Cable also named as fiber optic jumper, are made from single or multi-fiber cables and pre-terminated at each end with fiber optic connectors. Fiber optic pigtails are assembled connector on one end. Fiber optic connectors on the end of fiber patch cord cables can be of various types, including FC, SC, ST, LC, MU, E2000, MTRJ, MPO, SMA, FDDI, DIN, and D4. The purpose of a Optical fiber jumper is to connect one or more devices or equipment in a fiber optic network. There are two major application areas of fiber optic patch cables which are network station to outlet and fiber optic patch panels or optical cross connect distribution center.
High quality Fiber optic patch cable manufacturer
Description
1. Fiber Mode: Single mode or Multi mode
2. Cable Type: Simplex, Duplex Zipcord, or Multi-cores
3. Connector type: SC, FC, ST, LC, MTRJ, E2000, MU, MPO etc
4. Polish or Ferrule Interface Type: PC, UPC, APC
5. Cable Diameter: 0.9mm, 1.6mm, 2.0mm, 2.4mm, 2.8mm, 3.0mm
6. Outer Jacket: OFNR, OFNP or LSZH
7. Jacket Color: SM Yellow | OM1, OM2 Orange | OM3 Aqua | OM4 Pink
8. Durability: 500 cycles(0.2 dB max increase), 1000mate/demate cycles
9. Operating Temp.: -20 ˚C to +70˚C
10. Storage Temp.: -40 ˚C to +85˚C
Feature
1. FC, SC, ST, LC, MT-RJ, E2000 connectors assembled optional
2. 100% factory transmission tested per ANSI/TIA-568-C.3
3. Available in 0.9mm, 1.6mm, 2.0mm, 2.4 mm, 2.8mm, 3.0mm sizes
4. Low Insertion loss and high return loss
5. Good in repeatability and exchangeability
6. Telcordia GR-326-CORE Generic requirements for Single mode optical connectors and Jumper assemblies.
7. IEC 874-1 Generic specification for fiber optic connectors and cables
8. ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173
9. Cable flame resistant rate: OFNR or IEC60332-3 standard
