Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTh end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.
Patch cord SM G657B3 SC/APC-SC/APC Flexible White Cable
Description
Fiber Cable Type: Simplex Optical Fiber Cable
Fiber Type: SM G657.B3
Cable Jacket & Color: LSZH Jacket in White Color
Exterior cable diameter: 3.0mm
Patch Cable Length: 3meters
Connector Type on both sides: SC/APC to SC/APC
Insertion Loss (max.): SC/APC ≤0,3 dB
Return Loss: SC/APC ≥60dB
Radius of curvature: 30 mm
Cycles: >1000 insertions
Maximum Allowable Load Single fiber Cord: 30N
Maximum traction Rupture Single fiber Cord: 200 N
Standards: EN 50377-7-4; IEC 61754-20; EN 50377-4-2; ITU-T G.652
Feature
1. Superior to standard ITU-T G.657.B3 fibre, bending radius down to as small as 5mm and full compatibility with all G.652.D fibres.
2. Low attenuation satisfying the operation demand in O-E-S-C-L band
3. Low microbending loss for highly demanding cable designs including ribbons
4. Accurate geometrical parameters and large MFD which insure low splicing loss and high splicing efficiency High nd value satisfying long service life in minimum bend radius
5. 100% optically tested for insertion loss to ensure high quality
6. 100% endface cleaning to ensure dust-resistant
