-
LGX Module 1x16 PLC Splitter SC/APC is designed to house a 1x16 PLC Splitter with SC/APC connetor by plug and play for rack mount. The LGX Module PLC Splitter features low insertion loss, low polarization dependent loss and, high port-to-port uniformity. The PLC Splitter LGX Modules are available in 2, 4, 8, 16, 32 channel configurations with SC or LC connectors. -
Fiberlink’s Manual Variable Optical Attenuator (MVOA) is a device designed to attenuate an intensity or power level of an input optical beam in a controlled manner to produce an output optical beam with different attenuated intensities. The Variable optical attenuator can be used for power control and equalization for WDMs, FTTx, CATV and Test & Measurement Instruments. The VOA attenuator provides the pigtail with FC, SC, LC connector optional or without connector. -
Fiber splice enclosure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal spilce closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. All the optical splice closures we offered are with a great sealing performance. -
Fiberlink’s Dome Fiber Splice Enclosure are made of high-strength engineering plastics, which used for direct connection during optical fiber transmission process, and provides joint connection protection, with 10 small round cable holes and 1 large cable hole. With good sealing performance, the simple installation and wide application range are the best choice for optical fiber connection. The Mini Fiber Dome Splice Closures are suitable for 144 cores optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. -
Mini Half 96 FO Mechanical Sealing Fiber Splice Closure is suitable for 3 entry cable ports of 8-20mm fiber cable diameter and up to 96 fibers splicing. The Half Type mechanical splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Mini Half Mechanical 96 FO Fiber Splice Enclosure is a optical splice closure which can provide a great protection for 96 fiber splicing point. The Half Type mechanical splice closure is made of high-quality engineering material. They can be used for fiber-to-the-Home (FTTH) deployments and any type of optical fiber cable deployment in the outside plant. The Fiber Splice Enclosure is suitable for Wall mount or Pole mount as indoor or outdoor application, and have excellent mechanical sealed to protect fiber and splice ensuring durability. -
Mini Micro Air Blown Uni-tube Cable 1-12 fiber is the uni-tube design with small size used to be blown into a micro duct. Optical fibres are housed in a loose tube that is made of high-modulus plastic and filled with tube filling compound. Aramid yarns are placed outside the loose tube as the strength member, then a sheath with grooves is extruded. This type of cable is particularly applicable to air-blowing constructions in access networks. -
Mini SC FTTA Outdoor Waterproof Cable Assembly are providing a indoor and outdoor solution for FTTH network via terminating with flat drop or transitional round OSP cables. The connector interface is an SC/APC type within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The Mini SC waterproof fiber patch cable provides an ideal solution for direct burial, conduit or aerial installations -
The Mini Self-supporting Flat Drop Cable offers a compact, durable, self-supporting fiber cable in an easily accessible construction. The mini flat drop cable is of a polyethylene jacket, one Single-tube and two dielectric strength members to give high crush resistance. The single-tube design can be consists of 1 to 12 colored bare fiber and strands of water swellable yarns. Self-supporting Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of FTTx network. -
Mini Uni-Tube Air Blown Micro Cable is the uni-tube design with small size used to be blown into a micro duct. It is designed for metro feeder or access network. The outer thermoplastic layer provides a high level of protection and excellent installation properties. -
Fiberlink MPO/MTP Trunk cable is designs for Data Center Applications. It is divided into round cable and flat cable with the outer diameter of 3.0 mm or 4.5 mm. The MPO trunk cables are factory pre-terminated, tested and packed along with the test reports. -
MPO OM3 Fiber Optic Loopback Module Tester is typically used for test and measurement procedures in networking environments. The MPO Loopback plug is ideal for a multitude of applications that require signal looping in a MTP/MPO form factor. The MPO loopback tester connects the transceiver and receiver pairs, allowing testing to be performed on a complete link. -
New Aerial 144 Core Fiber Splice Enclosure with 6 Entry is a good splice closure which can provide a great protection for fiber splicing point. The horizontal fiber splice closure provides space and protection for up to 144 fibers splicing and joint. It has total 3inlet and 3 oulets on both sides. Aerial, Direct buried, Manhole, Pipeline are all available. -
New Aerial 72 Core Fiber Junction Enclosure is a passive splice closure which can provide a great protection for fiber splicing point. The high quality horizontal fiber optic splice closure provides space and protection for up to 72 fibers splicing and joint. It has total 3inlet and 3 oulets on both sides. Aerial, Direct buried, Manhole, Pipeline are all available. -
New design 8 ports Fiber Termination Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This fiber distribution box is typically used with 1x4 or 1x8 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. Anti-UV,Ultra violet resistant and rainfall resistant. -
New NAP 8xSC Fiber optic terminal box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration. This fiber optic distribution box is typically used with 1x4 or 1x8 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. -
ODVA-LC Outdoor IP67 Industrial DLC connector assembly is designed for outdoor waterproof connector attaches to adapter on panel of RRH. The common LC connector pair inside allows easier testing and cleaning. There are two types of connector plugs available: threaded and easy-connect bayonet. This ODVA-LC is a typical outdoor use fiber cable, suitable for different temperature and weather, especially ideal for FTTA and harsh environment use. -
Fiberlink's OM3 8 Strands MPO to LC/UPC Fiber Fanout cable is used to transit from backbone trunk cables to fiber management racks. MPO harness cables are designed to fanout standard optical connectors directly with input MTP/MPO connectors and output usually with LC,SC,FC,E2000 and so on. The MPO fanout pigtails are 100% factory tested and the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant. -
OM3 Plenum Armored Spiral Steel Distribution Cable, is put 900um or 600um tight buffer fibers wrapped a layer of Spiral Stainless steel tube and add a layer of water-blocking Kevlar yarns as strength unit, finally into fiber optic cable with PVC or LSZH sheath. The fiber core is protected by a Spiral steel tube that offers easy installation and high crush resistance. The plenum armored steel fiber optic cable allow direct buried or aerial installation for indoor or outdoor environmental conditions. -
The GYTA53 optical fiber cable is the steel tape armored outdoor fiber optic cable used for direct buried The tubes are filled with a water-resistant filling compound. Double sheath structure provide the cable nice properties of moisture resistance and crush resistance. Double armor structure provides cable good property of rodent-resistance. A layer of water-blocking material is applied around the cable core to prevent water ingress. It can be used for duct and direct buried application. -
FLK-FAT-324C Outdoor/Indoor Fiber Distribution Box is designed for directly splicing up to 144 fibers; It is also suitable for using with micro PLC Splitters. The distribution box works under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTH networks. -
Outdoor Figure 8 Flat Drop cable is a cable designed specifically for FTTH project. It adopts double reinforcement figure 8 structure, the optical fiber unit is positioned in the center, two parallel fiber reinforced steel wire are placed at two sides, then the cable is completed with a black or white color LSZH Sheath. This drop cable can directly drop into the building household from the fiber optic splice closure. -
FTTH Outdoor Wall mount Fiber Distribution Box is designed for the FTTx project and provide mechanical protection for fiber management system that include the functions of patching, splicing and passive optic components integration indoor or outdoor environments. This fiber distribution box is typically used with 1x8 or 1x16 Micro PLC Splitter & mounted with SC or LC Fiber adapter for FTTx access networks. It is the special type Fiber optic splitter terminal box, it support wall mount installation, be made of high impact plastic. Anti-UV,Ultra violet resistant and rainfall resistant. -
Fiberlink offers Outdoor Armored PDLC Waterproof Cable Assemblies. The PDLC to DLC armored cable is used for outdoor RRU transmitting optical signal and remote fiber feeder etc. Single mode and multi mode is available for chosen. Our PDLC waterproof cables are with standard duplex LC connectors. All our cables meet the standards of IEC61754-20 and RoHS and REACH materials compliant. -
Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTh end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation. -
Pen Type VFL 50mW Visual Fault Locator is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification. -
Plastic Din Rail Mount Fiber Patch Panel provides an effective solution for control panels and distribution cabinets where DIN mounted equipment is used. The cable entry is from the bottom of the enclosure which allows 1 cable to be secured using a cable gland. The Din Rail Mount Fiber Enclosue can be loaded with a variety of adapters like ST, SC and LC. -
FLK-OLS-830 Series Portable Optical Light Source is a handheld optical light source that provides 1310nm and 1550nm dual-wavelength laser output for single mode fiber measurements. With the use of optical power meter, you can measure the optical loss and connection loss of optical fiber system, which can help to evaluate the transmission quality of optical fiber link and fault handling. -
FLK-OPM630 Series Portable Optical Power Meter is an accurate and durable hand held meter designed for the installation, operation and maintenance of optical fiber network. It is a compact device with back light switch and auto power on-off ability. Besides, it provides ultra-wide measurement range, high accuracy, user self-calibration function and universal port. In addition, it displays linear indicators (mW) and non-linear indicators (dBm) in one screen at the same time. -
Pull-out 2U Rack Mount Fiber Patch Panel is designed with 1U, 2U, 3U, and 4U heights, which are suitable for 24, 48, 72 and 96 fibers distribution. The Pull-out Rack Mount ODF is made of cold-roll steel box, with special plastic splice cassette inside. Sliding Rack mount ODF Chassis with 19 or 21 inch mounting ears can be installed in a cabinet or rack. -
Rotary Fiber Patch Panel 1U for 24 SC Splice is good designed for either to support termination or fusion splicing of the fibers. It is made of cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. The Rotary Swing Rack Mount ODF is ideal for indoor fiber optic cables connection storage, distribution and management. -
Rotary Rack Mount Fiber Patch Panel 1U ABS Plastic is special designed up to 96 fibers termination or fusion splicing in data center cabling. 1U Rotary Swing Rack Mount ODF is made of plastic ABS material and cold rolled steel pivotal bracket. The Rotary Patch Panel can pivot by up to 110° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. The Fiber adapter plate can be cusomized to be 24 ports SC Simplex, or SC Duplex or LC Quad adapters. -
Fiberlink's SC Auto shutter Simplex adapter comes with an automatic shutter to protect against dust and other contaminants and prevents eye exposure to lasers. The Automatic shutter SC adapter meets the growing need for eye safety and connector cleanliness in today’s networking and telecommunication platforms. They are designed for mounting in panels with rectangular cutouts come with or without flange. Our SC Auto shutter adapters are available in simplex and duplex configurations and a variety of colors and options. -
FTTH Drop cable patch cord provides for quick subscriber connections. The drop cable assemblies are precision manufactured to rigorous quality standards, assure reliable performance and compatibility. The SC FTTH drop cable patch cord, apply to FTTH project corridor boxes, drop cable distribution boxes, FTTH fiber boxes and other forms of installation. -
SC Micro Fiber Terminal Box for Drop Cable is an indoor terminal box which applied to connect the drop cable in the FTTX network. FLK-FWT-302D Fiber Optic Wall Outlet covers the capacity of 1 core, 2 cores and 4 cores and supports splicing, Mechanical connection and FMC, wall mount installation. -
SC/APC Fiber fast connector is a perfect solution for filed working and FTTH connection. It is widely used for where need to quick connection, providing a quick assembly and stable performance. When engineers work in field for installation, maintenance, repair of optical fiber, or FTTH indoor termination.
