-
The GYTA53 optical fiber cable is the steel tape armored outdoor fiber optic cable used for direct buried The tubes are filled with a water-resistant filling compound. Double sheath structure provide the cable nice properties of moisture resistance and crush resistance. Double armor structure provides cable good property of rodent-resistance. A layer of water-blocking material is applied around the cable core to prevent water ingress. It can be used for duct and direct buried application. -
The All Dielectric Self-supporting (ADSS) Optical Fiber Cable is loose tube stranded Fiber cable, which is positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath. -
Outdoor Figure 8 Flat Drop cable is a cable designed specifically for FTTH project. It adopts double reinforcement figure 8 structure, the optical fiber unit is positioned in the center, two parallel fiber reinforced steel wire are placed at two sides, then the cable is completed with a black or white color LSZH Sheath. This drop cable can directly drop into the building household from the fiber optic splice closure. -
The Standard Air Blown Micro Fiber Cables are ultra lightweight with and small diameter and designed for metro feeder or access network to be blown into a micro duct by air-blown installation. As the cable allows the deployment of currently required fiber count, the micro cable provides a lower initial investment and the flexibility to install and upgrade to the latest fiber technologies after the initial installation. -
FLK-FWT-301A Fiber Optic Wall Outlet/Socket is used in the end termination of residential buildings and villas, to fix and splice with pigtails. This Fiber optic outlet can be installed on the wall mount with adapting variety of optical connection styles; Optical fiber can be managed effectively; Our high quality fiber optic socket is suitable in home or office and it is able to provide end users with optical access or data access. -
FLK-FWT-301C Fiber Optic Wall Socket is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. It can be fixed with SC type auto shutter adapter. FWT-301C Fiber optic wall outlet covers the capacity of 1 core, 2 cores and supports splicing, mechanical connection and FMC, wall mounted installation. -
FLK-FWT-302C Fiber optic wall outlet, also named as Fiber Optic Socket/Faceplate, is mini fiber organizers used to create a fiber connection point inside the home or office. The Fiber termination outlet is used for wall mounted or desktop applications and provides 1FO, 2FO or 4FO splicing with SC or LC connector. -
2 SC ports Fiber Access Terminal Box is the logger type Fiber Optic Wall Plates, the 2 Fiber Wall Outlet with 2 ports joint the fiber optic pigtails and drop cables during the fiber to home and fiber to desk solutions. -
FLK-FWT-302G Fiber Access Terminal Box is an indoor terminal box applied in the FTTX network to connect the drop cable and optical devices through fiber port. This fiber wall outlet is made of ABS plastic and designed for use in residential and business applications for the termination of up to 2 fibers. It can hold max one SC duplex adapters. It is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for FTTx network terminal distribution. -
Fiber Floor Terminal Box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. The Fiber Optic Floor Box is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
FTTH Fiber Optic Splice Box is specifically designed to be installed on each level of a Multi-Dwelling Unit (MDU) for fiber to the home (FTTH) applications. It is the transition point between the riser and the horizontal cable and provides operators with optimum flexibility. This Fiber Floor Boxes are typically used for indoor or outdoor application of access networks. It provides storage for both over length and terminated fibers as well as serving as a splice point. -
The Fiber Optic Splice Box is designed for the connection of optical fiber to pigtail and providing full splice and perfect fiber management. It has 4 splice trays, 36 splice in total, 12 drop ports. The Optical Distribution Box (ODU) is used for riser cable splicing indoor or in the street cabinet
