AV6481 Automatic alignment Fusion splicer is mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands.
AV6481 Automatic alignment Fusion splicer
Description
Technical Specifications
| Model | AV6481 Fiber Fusion Splice |
| Motor qty | 6 Motors |
| Alignment method | Cladding alignment, manual alignment |
| Applicable fibers | Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657. |
| Optical fiber diameter | Cladding: 80～150μm, coating layer: 0.1～3mm |
| Cleave length | 5～16mm（coated optical fiber diameter≤250μm）；
10mm（coated optical fiber diameter：0.25~3mm）; |
| Splice loss（typical） | 0.02dB（SMF）; 0.01dB（MMF）; 0.04dB（DSF）; 0.04dB（NZDSF） |
| Return loss | Better than 60dB |
| Splicing time (typical) | 7s (Fast mode) |
| Heating time (typical) | 28s（60mm protection sleeve） |
| Tension | 1.96～2.25N |
| Protection sleeve | 60mm, 40mm and a series of protection sleeves |
| Graphical display | High-performance 4.3 inch LCD |
| Magnification time | 320 times/88 times |
| Fusion records | 10000 groups |
| Remote maintenance | N/A |
| Battery capacity | 11.1V, 6800mAh |
| Battery service life | Cycle charging: 300～500 counts, can be replaced by customers |
| Electrode service life | Typical: 4000 counts, can be replaced by customers |
| Construction lighting | Built-in lights with high-brightness and wide lighting area |
| Working environment | Temp:-10～50℃；Hum: 0～95%RH，height above sea level: 0～6000m |
| Operation interfaces | GUI (graphical user interfaces) |
| External power | AC: 100～240V, 60Hz, 0～1.5A; DC: 10～15V |
| Port | USB / SD |
| Dimensions | 120mm（W）×130mm（H）×154mm（D）（without rubber anti-vibration pad） |
| Weight | 1.7kg （the battery not included）, 2.0kg（included the battery） |
Feature
1. Precise fiber core alignment, ultra-low fiber fusion splicing consumption
2. 7s fast fusion splicing, 18s highly efficient heating.
3. 320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length
4. 300 groups of fusion splicing modes, 100 groups of heating modes
5. 10000 groups of fusion records, 64 images storage
6. Ceramic presser foot, ceramic V-block, all-in-one fixture
7. Dual-direction splicing, automatic splicing, intelligent pyrocondensation
8. USB and SD card interfaces, U-disk automatic software upgrade
9. Built-in modular lithium battery, supports 220 times of splicing and heating cycles
